Carbon Tape Slitting Machine

Carbon Tape Slitting Machine

Tape slitter setting control:
1. Set the slitting menu according to the type, thickness, length, width, etc. of the film arranged in the slitting plan.
2. Lift the corresponding BOPP film file from the PDF.
3. Set the winding length and width of the film of the corresponding specification.
4. Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of the corresponding specifications.

Carbon Tape Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

eleven. Width deviation is too larg

Each user orders the film according to the shrinkage rate of the processed object and the film to accurately calculate the film width, try to get the lowest value to reduce the production cost. Therefore, the slit film width is too small, it is very easy to cause users. The processing width is not enough, and the film width is too large, which causes waste on the user's materials. In both cases, the user's complaint or even compensation may be caused. In actual operation, although the film width has a certain tolerance, the film width should be adjusted as much as possible on the standard width of the production construction sheet.
     Excessive deviation of film width is generally caused by human factors. Therefore, in the process of slitting, we need to detect the film width in the first time after conversion, transfer of specifications, transfer, equipment cleaning, equipment maintenance, adjustment of the tool holder, and replacement of the blade. The problem of preventing excessive deviation of the film width occurs.

Carbon Tape Slitting Machine

Slitting machine operation guide ---

4 operational requirements

4.2 Slitting
4.2.1 When loading paper, it is necessary to standardize the operation. If there are products that do not meet the quality requirements, the products should be picked out and clearly marked, and feedback should be sent to the squad leader.
4.2.2 Before the official production, the crew must pass the start-up information to each other, and it is not allowed to stack debris that interferes with the operation around the machine. The captain (blocking vehicle) shall compare the trial production sample with the standard proof, and self-check the product size specification. After confirming the pass, sign the first proof, and the sample will be retained until the end of the project.
4.2.3 When cutting, it is necessary to see the product specifications and determine in advance whether the size of the slitting knife meets the product quality requirements.
4.2.4 Each group of products must be self-tested, and the quality requirements and production process control shall be carried out according to the “Product Printing Process Card”.
4.2.5 After each group of products has been cut, the product label is affixed to the self-test and the production record is filled. The products to be re-rolled are processed on the shift; the items to be treated or scrapped are labeled and transferred to the treated area or waste as required. Area. The label of each product must clearly and accurately indicate the current product status, quality or problems.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com