Gum Tape Siltter Slicing Machine

Gum Tape Siltter Slicing Machine

Tape cutting machine receipt:
1. When the inner and outer ends of the machine are stopped, use the unloading button to place the film on the prepared unloading trolley, cut the film and paste the film roll with the sealing glue.
2. Use the collet release button to release the chuck and check whether the film cores have left the core. If one is still stuck on the core, manually remove the film roll manually.
3. After ensuring that all the film leaves the chuck on the trolley, use the film button to raise the winding arm, install the corresponding paper core, and attach the film to the paper core for the next slitting.

Gum Tape Siltter Slicing Machine

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(iv) Effect of film roll tightness on product quality

(5) Coping methods
1. Reasonable principle: Applicable is reasonable, which means that the cutting operator and the quality inspector are too loose according to the winding/
Too tightly influence the degree of influence on different products, adjust the cutting process reasonably, and reasonably grasp the tightness of the film roll to meet the requirements of the use of film products.
2. Ningsong Motight principle: objective when cutting equipment status, product specifications, film performance characteristics, etc.
When the influence of the condition causes the winding tightness to be in an inappropriate degree, the principle of tightness is generally used, because the problem of over-tightening often makes the film unusable, except for the special requirements.
3. The principle of primary and secondary: it means that in the process of slitting production, small groups should be followed to the interests of large collectives.
The principle of benefiting the interests of the company, avoiding the pursuit of high output and high distribution for the purpose of reducing the quality of cutting, all should be based on product quality, maintaining the German crown film brand as the responsibility, effectively completing various production and quality indicators Effectively serve the enterprise and users, and strive to be the best supplier of film.
4. System Management Principles: Refers to the use of systematic, scientific management methods, practical, theoretical, and empirical
The accumulated cutting control method is compiled, and according to the optimal combination of different types of products, width, winding length, season and other external variables and slitting tension, pressure and other internal variables, the document control management is performed to form an operation guidance document. Minimize the influence of subjective factors, reduce the impact caused by insufficient individual ability or excessive dependence on experience, and continuously supplement, optimize and improve the operation guidance documents to meet the needs of system management.

Gum Tape Siltter Slicing Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

nine. Scratch
      Whether the slitting and scratching can be compared and determined by the film surface before and after the slitting, there are various reasons for the scratching of the membrane surface, and the analysis should be based on the appearance of the scratch, such as short-line scratching. The difference of the speed ratio of each drive roller exceeds the process setting requirement, and it needs to be carefully tested and adjusted. If the film surface scratch occurs continuously, the film on the slitter should be inspected for whether it touches the fixed object or cuts each. Whether the roller adheres to dirt such as fine sand grains scratches the film surface.
Scratch is the appearance quality problem of the film, which directly affects the quality appearance of the deep-processed product. Therefore, it is not allowed to exist in the film quality control standard. The slitting process finds that the scratching problem must be carefully checked and quickly eliminated. Since the scratch on the film surface is an irreversible appearance quality problem, it is not allowed to operate the disease when the film surface is scratched, so as to avoid the continuous occurrence of the problem.
      

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com