Tape cutting machine receipt：
1. When the inner and outer ends of the machine are stopped, use the unloading button to place the film on the prepared unloading trolley, cut the film and paste the film roll with the sealing glue.
2. Use the collet release button to release the chuck and check whether the film cores have left the core. If one is still stuck on the core, manually remove the film roll manually.
3. After ensuring that all the film leaves the chuck on the trolley, use the film button to raise the winding arm, install the corresponding paper core, and attach the film to the paper core for the next slitting.
Reasons, countermeasures and effects of BOPP film slitting quality ---
twelve. Interface quality problem (poor interface quality, interface identifier does not match)
2. Interface identifier
Due to the large thickness of the film interface, the film roll for some applications must be properly handled at the interface to avoid unnecessary problems, such as slowing down, increasing the gap between the coating blade, and printing the offset plate. The interface products must be identified as necessary to facilitate customer identification and internal management.
1 The color of the adhesive interface is generally beige, special requirements are used according to the regulations. For example, Shanghai Ziquan requires the use of black adhesive tape; the marking method of the joint position is operated according to the regulations, such as Zhuhai Zhongfu Pearl Film, Shenzhen Ruimei The hot film is required to be marked at the ends of the interface with yellow paper dust protruding from the end of the film roll by about 1 cm; other special marks are operated according to the requirements of the production tribe.
2 Require the slitting workshop to mark the length number of the joint product without special requirements after the length of the label in the length column of the package label, and mark the “buter” mark on the note bar of the computer, and mark “+” on the remark column. Marking, pearl film and imitation paper film and exporting pearl film should indicate the length of each product before and after the joint on the length column of the product specification. For special requirements, the relevant marking work should be done according to the regulations (such as Shanghai Ziquan product port). The rate of less than or greater than 25% requires the number of interface products on each board product).
Slitting machine operation guide ---
5 handling of abnormal conditions
5.1 Once the quality problem is found in the cutting process, it should be stopped immediately and recorded. The products that cannot be processed should be strictly distinguished, and the label should be marked and reported to the workshop to be handled by the monitor.
5.2 If the abnormal cutting process, abnormal smell, high temperature or sudden failure occurs, the machine should stop immediately. The machine personnel should fill in the “equipment failure repair order” and submit it to the squad leader for confirmation. Also recorded in the production record. 5.3 Timely feedback to the squad leader for problems that cannot be dealt with with quality, equipment, materials, and crafts.
5.4 Equipment failure Machine personnel should actively cooperate with the machine repair to debug, and record the equipment failure, the amount of damage, etc. in the "machine failure debugging consumption table", signed and confirmed by the machine personnel, the shift supervisor, and the machine repair class. The number of equipment faults after on-site confirmation is not included in the consumption assessment.
5.5 When the machine is running, it is strictly prohibited to be unattended.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc