1280mm Automatic Four Shaft Adhesive Bopp Jumbo Roll Tape Slitting Machine

1280mm Automatic Four Shaft Adhesive Bopp Jumbo Roll Tape Slitting Machine

Main factors affecting tension stability:
(1) The change of the speed of the machine will inevitably cause the change of the tension of the whole machine.
(2) During the process of collecting and unwinding, the winding and unwinding diameters of the slitting machine are constantly changing, and the change of the diameter will inevitably cause the change of the material tension. When the unwinding torque is constant, the diameter is reduced and the tension is increased. The winding is reversed. If the winding torque is constant, the tension will decrease as the winding diameter increases. This is the main factor that causes the change in material tension during operation.
(3) The change in the tightness of the raw material roll will also cause a change in the tension of the whole machine.
(4) The unevenness of the material of the raw material is cut. If the material elasticity fluctuates, the material thickness changes along the width and length direction, the mass of the material roll is eccentric, and the temperature and humidity of the production environment change, which also affects the tension fluctuation of the whole machine.
(5) The various transmission mechanisms (such as guide rollers, floating rollers, flattening rollers, etc.) of the slitting machine have factors such as imbalance and unstable air pressure.

1280mm Automatic Four Shaft Adhesive Bopp Jumbo Roll Tape Slitting Machine

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(3) Causes of loose/overtightening of the film roll
1. The influence of the cutting parameters (winding sheet / pressure curve setting factors, etc.);
2. Effect of film properties (stiffness, thickness, single/double corona surface, smoothness, static electricity, etc.)
Ringing, the slitting parameters must be set according to the film with different characteristics);
3. The effect of the winding speed (when the winding speed is slower, the more time the slitting process is to discharge the air in the film roll, the tighter the film winding is);
4. Product specifications (width, length, collocation, etc.);
5. The influence of the performance of the slitting equipment (adjustability, stability, operability, etc.);
6. The influence of operational factors (professional level, operational skills, job responsibility, etc., generally expressed in the insertion
7. The quality of the work is wrong, such as poor air-suction, rewinding card head position, poor adjustment, and unwinding roller pressure; The influence of environmental factors (temperature, humidity, etc.);
8. Influencing factors of the appraisal system (Operator considers the appraisal of the secondary processing and rewinding indicators in the workshop, and often adopts the coping method of winding up and not loosening, which is one of the factors that cause the film roll to be over-tightened);

1280mm Automatic Four Shaft Adhesive Bopp Jumbo Roll Tape Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

Fives. Multilateral
Although the polygon and the end face are not the same as the faulty end faces of some layers of the film roll, the two are different. The unevenness of the end face is the jagged phenomenon that occurs when the film width is not changed, and the multilateral product The film width is slightly wider than the normal size.

1. Multilateral impact on quality of use
The impact of multilateral use on the end is basically the same as that of the end face, mainly to track the problem of alignment and the impact on the appearance of the product.

 

 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com