Main factors affecting tension stability：
(1) The change of the speed of the machine will inevitably cause the change of the tension of the whole machine.
(2) During the process of collecting and unwinding, the winding and unwinding diameters of the slitting machine are constantly changing, and the change of the diameter will inevitably cause the change of the material tension. When the unwinding torque is constant, the diameter is reduced and the tension is increased. The winding is reversed. If the winding torque is constant, the tension will decrease as the winding diameter increases. This is the main factor that causes the change in material tension during operation.
(3) The change in the tightness of the raw material roll will also cause a change in the tension of the whole machine.
(4) The unevenness of the material of the raw material is cut. If the material elasticity fluctuates, the material thickness changes along the width and length direction, the mass of the material roll is eccentric, and the temperature and humidity of the production environment change, which also affects the tension fluctuation of the whole machine.
(5) The various transmission mechanisms (such as guide rollers, floating rollers, flattening rollers, etc.) of the slitting machine have factors such as imbalance and unstable air pressure.
Slip axis and air shaft of slitting machine--
The inflation shaft is a special type of winding and unwinding, that is, the shaft that can be raised by the surface after high pressure inflation.
After deflation, the surface part (referring to the key bar) is quickly retracted. Its name is diversified, also known as pneumatic shaft, expansion shaft, inflation shaft, air expansion roller, inflation shaft, pressure shaft, air expansion roller, etc.
The slip axis, also known as the slip type air-up axis, is a special segmentation of the gas-increasing shaft, independent slip and torque setting structure, which will solve the unwinding phenomenon caused by the thickness and uneven tension of each roll of material. Can effectively improve product quality and work efficiency.
Domestic cutting machine development status and outlets ---
First, the status quo of domestic slitting machine
At present, the domestic use of the slitting machine is mainly divided into several stages, and the first stage is mainly used for the main line slitting as one slitting. One slitting is mainly provided to downstream deep processing enterprises, and the downstream customers are divided into secondary slitting or three slitting. The film making manufacturers of this meeting are mainly cut into one slitting, with the competition of film forming enterprises in recent years. Intense, in order to provide better services to downstream customers, film companies have also added a second cut. In one slitting, the most used brand is CommScope, followed by Atlas, and the Japanese slitter is rarely used in one slitting. With the rise of domestic equipment manufacturing industry in recent years, domestic slitting machines have a certain foothold in a slitting process. Of course, compared with foreign slitting machines, there is still a certain gap in domestic slitting machines. From the user's point of view, I personally think that there is a certain misunderstanding, mainly because of the lack of deep understanding of the slitter market. Everyone knows that there must be a performance price ratio when purchasing a piece of equipment. In fact, the performance and price ratio of the above mentioned brands are not necessarily the best. Some people in the United States have done such an experiment. The above-mentioned brand slitting machine is compared with the Japanese Knife cutting machine. When the same film material is cut, the result is that Japan's Kataoka wins, mainly in terms of stability and speed, speed reduction and non-stretching. Japan's Kataoka has shown superior quality and its price is lower than the above brands. Unfortunately, in the domestic film-making enterprises, no one slitting machine used Japan's Kataoka slitting machine. It is a pity that domestic companies have bought foreign second-rate equipment at the highest price. I have researched the US market. Japan's Kataoka has a high market share in the US market. I believe that with the increase in market demand and fierce competition, domestic companies will come out of this misunderstanding and re-recognize the market of slitting machines. Compared with the first slitting, the third slitting and the one slitting, the status quo of the domestic slitting machine is diversified. One slitting is mainly the importing equipment to play the leading role, while the secondary slitting and three slitting fields are in the field. The domestic market has its own magical powers, including Europe, Japan, and Taiwan. In recent years, the domestically produced slitting machines have gradually replaced the trend of foreign brands, resulting in the following results:
1. Foreign advanced cutting technology has gradually flowed to China;
2. The rise of domestic manufacturing;
3. Popularization of advanced control technology;
4, the low cost of manufacturing causes the price of the slitting machine to be low;
The above various reasons have jointly promoted the domestic film-making enterprises to choose domestic slitting machines. As time goes by, I believe that the domestic cutting opportunities become more mature and the performance is better.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc