Masking Tape Roll Slitting Rewinding Machine

Masking Tape Roll Slitting Rewinding Machine

Tension information detection method
(1) Tension sensor detection method: It is a method of detecting the tension directly, closely combined with the machine, and without moving parts. Usually two sensors are paired and mounted on the end shafts on both sides of the detection guide roller.
(2) Roll diameter calculation type detection method: It uses the proximity switch installed at the reel to detect the rotation speed of the reel. Because the reel rotates once, the winding diameter will change twice the thickness of the material.
The current diameter of the reel is obtained by cumulative calculation by the initial value of the reel diameter and the material thickness, and the change of the corresponding reel diameter reflects the change of the actual tension value.
(3) Floating roller position detection mode: It uses the cylinder attached to the slitter to connect the floating roller to drive the angular displacement sensor to detect the tension change. When the tension is stable, the tension on the material is balanced with the cylinder force, so that the floating roller is in the center position. When the tension changes, the balance between the tension and the cylinder force is broken, and the position of the floating roller will rise or fall. At this time, the swing lever will rotate around a point and drive the floating roller angular displacement sensor to rotate together.
(4) Floating roller position + tension sensor combined tension detection mode: It can simultaneously detect the floating roller position signal output by the floating roller angular displacement sensor and the tension signal output by the tension sensor, thereby providing higher precision tension control to the system. [3].

Masking Tape Roll Slitting Rewinding Machine

Slip axis and air shaft of slitting machine--

 

Features:
1: Inflatable operation time is short, the separation and placement of the inflation shaft and the paper tube can be completed in 3 seconds to complete the inflation and deflation, and it is not necessary to separate any parts on the shaft end side to be tightly engaged with the paper tube.
2: The paper tube is simply placed: in the action of inflation and deflation, the paper tube can be moved and fixed at any position on the shaft surface.
3: The bearing weight is large: the diameter of the shaft can be determined according to the actual needs of the customer, and the high-hardness steel is used to make the bearing weight increase.
4: High economic efficiency: The design of the shaft is special, and it can be applied to all kinds of paper tubes of thick, thin, wide and narrow.
5: Simple maintenance and long use time: The inflation shaft is a single part, and each part in the structure has fixed specifications, which can be used interchangeably, making it easy to maintain.
Specifications: There are a variety of, including 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, 6 inch, 8 inch, 10 inch, 12 inch, etc., according to demand can be processed to produce different specifications of the expansion axis.

 

Masking Tape Roll Slitting Rewinding Machine

Domestic cutting machine development status and outlets ---

4. Lack of independent innovation, boldly out of their own characteristics
At present, most of the domestic slitter manufacturers are counterfeit foreign products. Most of them are in the German, Japanese, and Taiwanese styles. Their structures are quite different. What's more, they are copied and copied. Not to mention serious violations of the intellectual property rights of others, there is no driving force for China's slitter manufacturing industry, which will bring China a very unfavorable factor in the next round of international market competition. Everyone knows that plagiarizing others will achieve short-term performance in the market, but in the long run, in addition to inhibiting the development of enterprises, it also has a negative impact on related industries, and also limits the film-making enterprises. Towards international competition. I personally believe that in addition to drawing on foreign advanced technology and experience, we must also focus on self-innovation, give full play to the wisdom of Chinese people, and create first-class cutting equipment at the lowest cost, so that filmmakers can make the next round. In the international competitive environment, it brings a greater competitive advantage.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com