Belt Slitting Machine

Belt Slitting Machine

Slitting machine instruction manual -

Second, the use of procedures;
1. Check whether the parts of the machine are loose due to transportation and other reasons, adjust the four foot screws of the machine, and verify that the machine is level on the ground.
2. External high-pressure gas is supplied to the pressure regulating valve. The purpose of the second air pipe blowing is to eliminate the residual nozzle in the empty groove at the lower right of the drum, so that the drum can smoothly accept the new nozzle and adjust the pressure of the pressure regulating valve. The best use.

Belt Slitting Machine

Slitting machine operation guide ---

4 operational requirements
4.1 Preparation before cutting:
4.1.1 Before the cutting, the paper sent from the warehouse or the semi-finished products transferred from the previous process should be checked with the “production work order” to see if the paper quality, quantity, specifications, etc. meet the requirements of the work order. If problems such as quantity or quality are found, they should be promptly submitted to the dispatcher or feedback to the squad leader. After confirmation, the logo will be clearly marked and returned to the warehouse or semi-finished product area, and the qualified products will be re-sorted for cutting. If the feedback is not received, it will be deemed as acceptance. If there are quality problems such as insufficient quantity at the end, the personnel will be responsible.
4.1.2 Lubricate the equipment according to the maintenance requirements of the machine and check whether the safety protection devices of the equipment are effective.
4.1.3 Carefully check the quality of the front and back of the paper, graphics, paper, etc., to avoid the material specifications, model or quality of the products that are put into production do not match the requirements of the cut products.
4.2.1 Carefully check the accuracy and sensitivity of the electronic scale and vernier caliper, confirm whether it meets the requirements for use, and report the abnormality in time to report with the squad leader.

Belt Slitting Machine

The basic knowledge of the slitting machine and its development process --

Basic knowledge and development of slitting machine

In the process of slitting, the stable tension system is an important indicator to ensure the quality of the product. It controls the mutual tension between unwinding, drawing, slitting, winding, etc., so that the slitting material is always in the cutting process. A steady state. If the tension is properly controlled, it can avoid the deformation and drift of the raw materials during the process of speeding up and slowing down the machine. Generally, the unwinding tension is slightly larger than the sum of the reel tensions. Most of the previous slitting machines use magnetic powder clutch to control the tension, but the magnetic powder clutch speed can not be high. It is easy to cause high-speed friction of the magnetic powder during operation, which causes high temperature and shortens its life. In severe cases, it will be stuck and the machine operation will be blocked. With the development of science and technology, the use of servo drive technology, most of them now use vector variable frequency motor to control the tension system of the slitting machine. The automatic detection of the pendulum roller makes the man-machine interface intuitive, the tension system is more stable and reliable, and easy to operate.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com