Bopp Tape Slitting Machine Automatic Adhesive Tape Cutting Machine

Bopp Tape Slitting Machine Automatic Adhesive Tape Cutting Machine

Slitting machine instruction manual -

Second, the use of procedures;

3. Connect the external three-phase power supply, open the key switch placed on the operation button box, the green light on the right indicates that the power supply has been normally turned on, and the black knob adjuster placed on the corner box of the operation button is the small puller in the upper right corner of the control wheel drum. The speed of the motor is adjusted to the speed of the small puller by turning the knob. In actual use, the knob is adjusted to the highest (clockwise direction).

Bopp Tape Slitting Machine Automatic Adhesive Tape Cutting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---
two. Wrinkles (wrinkles, vertical wrinkles, cross wrinkles, wrinkles)

With the continuous improvement of slitting technology, the length of wrinkle is becoming less and less, and the products of individual manufacturers have achieved zero wrinkle, which undoubtedly grasps the opportunities in the fierce competition environment. It is worth noting that the wrinkles that we sometimes appear are not caused by the unreasonable setting of the cutting parameters, but because our operators are not responsible for the work, and the film is not attached to the paper tube but is free. After the film is put on the paper tube, it is turned on and cut, and the quality of the wrinkle is artificially created. It must be paid attention to, eliminate the defects of human quality and improve the quality of the product.

Bopp Tape Slitting Machine Automatic Adhesive Tape Cutting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

six. Burr
Most of the reason for the burrs is that the cutting knife is too blunt, and replacing the cutter can solve the problem. Different types of films have different degrees of wear and tear on the cutters. The thicker the thickness, the greater the wear on the cutters, and the wear of the cutters due to the titanium dioxide and other materials. It is fast, so it is necessary to adjust the blade cutting position or replace the blade according to different cutting objects in time to avoid the appearance of raw products. Due to the high cost of cutting the raw edge product (retrocuting processing cost and edge material loss), it is much higher than the value of the scrapping blade. Therefore, preventive measures should be taken, and the replacement cycle of the blade should be budgeted. Adjust or replace the blade before the problem occurs. Blades reduce losses.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com