Turret Shaft Bopp Slitter Rewinder Machine

Turret Shaft Bopp Slitter Rewinder Machine

Slitting machine instruction manual -

Second, the use of procedures;

3. Connect the external three-phase power supply, open the key switch placed on the operation button box, the green light on the right indicates that the power supply has been normally turned on, and the black knob adjuster placed on the corner box of the operation button is the small puller in the upper right corner of the control wheel drum. The speed of the motor is adjusted to the speed of the small puller by turning the knob. In actual use, the knob is adjusted to the highest (clockwise direction).

Turret Shaft Bopp Slitter Rewinder Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

twelve. Interface quality problem (poor interface quality, interface identifier does not match)

3. Interface length and interface rate requirements
Since the interface products will inevitably generate certain scraps before and after the interface, and the quality of the interface products cannot reach 100% of the quality level of the interfaceless products, increasing the loss of use, therefore, the film manufacturers and users are The number of interfaces of the volume product and the interface ratio of each batch of products are specified, so that the interface products are controlled within a certain range.

Turret Shaft Bopp Slitter Rewinder Machine

Domestic cutting machine development status and outlets ---

2. Lack of composite professional talents who understand manufacturing technology and process and know cutting process
In the manufacturing process of the slitting machine, different customers are often faced with different materials and requirements. If different manufacturers produce the same materials, the raw materials used are not the same chemical plant products, and the physical properties of the materials produced are not the same. When producing the slitting machine, it cannot be generalized. In the production process, the manufacturing process will change, especially in the size of the roll diameter and the thickness of the coating layer, the difference between the active roller and the passive roller and the wrap angle of the roller surface, etc. The lack of corresponding research talents in the field often leads to many waste products and defective products in the slitting process. Such composite talents should not only be familiar with the design and manufacturing process of the entire slitting machine, but also understand the different characteristics of different materials during slitting. Currently, it is very scarce in China, which leads to the current situation of domestic slitting machines.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com