Slitting machine instruction manual -
Second, the use of procedures;
4. Check the position of the knife holder and the nozzle of the drum on the left side of the drum, and adjust the left and right distance of the blade so that the blade can be cut into the blade groove of the drum in the middle. The distance between the two blades is the length of the cutting nozzle: 20mm and 15mm. , tighten the screws on the blade holder to secure the blade position
Slitting machine operating procedures -
Third, through the film：
9. Press “Device Jog” again, and the film on both sides will be flattened until the slitting film appears on the winding side 2, and the film is cut with a knife.
10. Manually pull the slit film on the winding side 1 and the winding side 2, bond the film to the corresponding paper core, and tighten the film and stick the flat film to the paper core (note the side 1 and side 2 films). Wearing different methods).
11. Manually adjust the leading edge probe into position.
12. Set the winding length and winding diameter on the operation screen (see the preset length and diameter method for details)
Reasons, countermeasures and effects of BOPP film slitting quality ---
The raw edge product not only affects the appearance, but also directly affects the use. The edging product is observed with a magnifying glass. The edge of the film is jagged. The film roll is prone to breakage during use, and the consequences are very serious. For example, if the printed film breaks during the printing process, the ink will be caused. Splash, need to clean the machine and the ground, and then lead the film, re-coloring and other processes, production of physical and working loss; if the tape film breaks during the coating process, it is necessary to open the oven more than ten meters, re-introduction Membrane, turn off the oven, heat up and reproduce. These are things that users are very annoying and we must pay attention to.
In addition, we must pay attention to the protection of the end face during the moving process of the film roll, the film end face gap caused by the operation accident, and the gap has high concealment, the problem is difficult to find and flow to the user, the product will be Use has a greater impact.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc