Fully Automatic Self Adhesive Tape Slitting Machine

Fully Automatic Self Adhesive Tape Slitting Machine

Slitting machine instruction manual -

Second, the use of procedures;

4. Check the position of the knife holder and the nozzle of the drum on the left side of the drum, and adjust the left and right distance of the blade so that the blade can be cut into the blade groove of the drum in the middle. The distance between the two blades is the length of the cutting nozzle: 20mm and 15mm. , tighten the screws on the blade holder to secure the blade position

Fully Automatic Self Adhesive Tape Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

thirteen. Foreign matter such as dust and small flying insects in the film roll
In the slitting process of the film, the mother roll film needs to be unwrapped and then slit and wound, which creates conditions for the entry of foreign matter. Since many film products themselves need to be in direct contact with foods, medicines, etc., the hygiene requirements are very strict, and the film is not allowed to be attached with foreign objects such as mosquitoes. Once found, it causes major quality complaints and claims, directly causing the company's economic loss and product brand. Damaged and negatively affected, therefore, the environmental cleaning and purification work in the production workshop plays a very important role in ensuring the quality of the film.

Fully Automatic Self Adhesive Tape Slitting Machine

Domestic cutting machine development status and outlets ---

2. Lack of composite professional talents who understand manufacturing technology and process and know cutting process
In the manufacturing process of the slitting machine, different customers are often faced with different materials and requirements. If different manufacturers produce the same materials, the raw materials used are not the same chemical plant products, and the physical properties of the materials produced are not the same. When producing the slitting machine, it cannot be generalized. In the production process, the manufacturing process will change, especially in the size of the roll diameter and the thickness of the coating layer, the difference between the active roller and the passive roller and the wrap angle of the roller surface, etc. The lack of corresponding research talents in the field often leads to many waste products and defective products in the slitting process. Such composite talents should not only be familiar with the design and manufacturing process of the entire slitting machine, but also understand the different characteristics of different materials during slitting. Currently, it is very scarce in China, which leads to the current situation of domestic slitting machines.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com