Bopp Tape Slitting Machine Cutting

Bopp Tape Slitting Machine Cutting

Slitting machine instruction manual -

Second, the use of procedures;

5. After filling the nozzle, turn on the key switch power, the green light is on, pay attention to the following operations:
A. Always press the knife green button first to make the blade rotate first, and check if the rotation is smooth and there is no harsh sound.
B. Press the Drum green button again to make the drum rotate, and confirm that the small shaft in the upper right corner of the drum starts to rotate, and then start working.
C. If there is a fault and need to stop, always confirm: first press the Drum red stop button, stop for 1-2 seconds and then press the Knfe red button to stop the blade, so as to avoid the stick stick between the drum and the blade.

Bopp Tape Slitting Machine Cutting

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

thirteen. Foreign matter such as dust and small flying insects in the film roll

In addition, paper-end paper dust contamination, contamination of the film roll by the operator and the packaging staff, uneven size of the paper tube, label identification (length, weight, etc.), bumps, poor packaging, etc. are also easy to cut. For quality problems, we must pay attention to every detail during the operation and packaging process. For example, before the slitting machine starts, the film should be neatly placed and attached to the paper tube. The film should not exceed the end of the paper tube. Pay attention to the hands of the operator. Neat and clean environment of the cutting place, the packaging and handling process should be handled with care. When the film roll is moved down the manual forklift, pay attention to the stability, do not hit the film surface, the sealing box of the packaging process, the sticker cap, the sticker The labeling and labeling should be carried out in strict accordance with the specified requirements, position and size. It is not free to ensure the quality of the film products from every link.

Bopp Tape Slitting Machine Cutting

Domestic cutting machine development status and outlets ---

2. Lack of composite professional talents who understand manufacturing technology and process and know cutting process
In the manufacturing process of the slitting machine, different customers are often faced with different materials and requirements. If different manufacturers produce the same materials, the raw materials used are not the same chemical plant products, and the physical properties of the materials produced are not the same. When producing the slitting machine, it cannot be generalized. In the production process, the manufacturing process will change, especially in the size of the roll diameter and the thickness of the coating layer, the difference between the active roller and the passive roller and the wrap angle of the roller surface, etc. The lack of corresponding research talents in the field often leads to many waste products and defective products in the slitting process. Such composite talents should not only be familiar with the design and manufacturing process of the entire slitting machine, but also understand the different characteristics of different materials during slitting. Currently, it is very scarce in China, which leads to the current situation of domestic slitting machines.
 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com