Slitting machine instruction manual -
Second, the use of procedures;
6. The gears inside the tool holder are regularly cleaned and greased.
7. When moving the tool holder, remove the upper and lower screws and translate it to the left to release the blade from the blade groove of the drum. Then release the timing belt and pull out the timing pulley on the tool holder shaft to remove the whole. Tool holder for maintenance and cleaning.
During installation, the tool holder translates against the drum, so that the blade is correctly cut into the drum groove, fix the upper and lower screws, install the timing pulley from the back, and loosen the foot screw of the drive motor to the right to facilitate the synchronization. With the belt, then the motor base moves to the right, confirming the proper tightness of the timing belt, and fixing the motor base screw to work normally.
Reasons, countermeasures and effects of BOPP film slitting quality ---
eleven. Width deviation is too larg
Each user orders the film according to the shrinkage rate of the processed object and the film to accurately calculate the film width, try to get the lowest value to reduce the production cost. Therefore, the slit film width is too small, it is very easy to cause users. The processing width is not enough, and the film width is too large, which causes waste on the user's materials. In both cases, the user's complaint or even compensation may be caused. In actual operation, although the film width has a certain tolerance, the film width should be adjusted as much as possible on the standard width of the production construction sheet.
Excessive deviation of film width is generally caused by human factors. Therefore, in the process of slitting, we need to detect the film width in the first time after conversion, transfer of specifications, transfer, equipment cleaning, equipment maintenance, adjustment of the tool holder, and replacement of the blade. The problem of preventing excessive deviation of the film width occurs.
Domestic cutting machine development status and outlets ---
First, the status quo of domestic slitting machine
At present, the domestic use of the slitting machine is mainly divided into several stages, and the first stage is mainly used for the main line slitting as one slitting. One slitting is mainly provided to downstream deep processing enterprises, and the downstream customers are divided into secondary slitting or three slitting. The film making manufacturers of this meeting are mainly cut into one slitting, with the competition of film forming enterprises in recent years. Intense, in order to provide better services to downstream customers, film companies have also added a second cut. In one slitting, the most used brand is CommScope, followed by Atlas, and the Japanese slitter is rarely used in one slitting. With the rise of domestic equipment manufacturing industry in recent years, domestic slitting machines have a certain foothold in a slitting process. Of course, compared with foreign slitting machines, there is still a certain gap in domestic slitting machines. From the user's point of view, I personally think that there is a certain misunderstanding, mainly because of the lack of deep understanding of the slitter market. Everyone knows that there must be a performance price ratio when purchasing a piece of equipment. In fact, the performance and price ratio of the above mentioned brands are not necessarily the best. Some people in the United States have done such an experiment. The above-mentioned brand slitting machine is compared with the Japanese Knife cutting machine. When the same film material is cut, the result is that Japan's Kataoka wins, mainly in terms of stability and speed, speed reduction and non-stretching. Japan's Kataoka has shown superior quality and its price is lower than the above brands. Unfortunately, in the domestic film-making enterprises, no one slitting machine used Japan's Kataoka slitting machine. It is a pity that domestic companies have bought foreign second-rate equipment at the highest price. I have researched the US market. Japan's Kataoka has a high market share in the US market. I believe that with the increase in market demand and fierce competition, domestic companies will come out of this misunderstanding and re-recognize the market of slitting machines. Compared with the first slitting, the third slitting and the one slitting, the status quo of the domestic slitting machine is diversified. One slitting is mainly the importing equipment to play the leading role, while the secondary slitting and three slitting fields are in the field. The domestic market has its own magical powers, including Europe, Japan, and Taiwan. In recent years, the domestically produced slitting machines have gradually replaced the trend of foreign brands, resulting in the following results:
1. Foreign advanced cutting technology has gradually flowed to China;
2. The rise of domestic manufacturing;
3. Popularization of advanced control technology;
4, the low cost of manufacturing causes the price of the slitting machine to be low;
The above various reasons have jointly promoted the domestic film-making enterprises to choose domestic slitting machines. As time goes by, I believe that the domestic cutting opportunities become more mature and the performance is better.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc