Center Surface Slitting And Rewinding Machine

Center Surface Slitting And Rewinding Machine

Slitting machine operating procedures -

First. When the unwinding machine normally replaces the parent roll
1. The machine is wound up and the machine speed is zero. Press the "machine off" button and all drives are turned off.
2. Press and hold the “core release” button to make the chuck exit the empty core, the empty core is placed on the unloading guide, and then the pneumatic ejector will automatically
Empty the core to the unloading position, release the button, and the steel core is to be transported away by the crane.
3. Press the “Coil Snap” button briefly to retract the cylinder rod at the unwinding position to the receiving position.
4. According to the plan, attach the corresponding mother roll to the double-sided tape, and hang the new mother roll into the V-shaped support that supports the parent roll, and hang the empty roll.
core.
5. Press and hold the “Coil Core Clamp” button to make the card head into the new parent roll until the card head positioning pin is in place and release the button. 6. Adjust the length and diameter of the unwinder on the operation screen (correct the input value if necessary), and replace the parent roll.

Center Surface Slitting And Rewinding Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

twelve. Interface quality problem (poor interface quality, interface identifier does not match)
1. Interface requirements
Due to poor interface, the quality of the film roll may be broken or wrinkled, which may cause adverse effects in the user's use. Therefore, the film interface must be connected to the specified specification to ensure the joint quality of the interface. Specific requirements are as follows: 
1 The two sections of the joint are cut and flattened horizontally, and the beige (or other specified color) adhesive tape with a width of 72 mm is firmly adhered to the front and back sides of the film;
2 In order to improve the interface quality, the film interface is required to be straight and balanced with the paper tube direction, and the interface is required to be flush and wavy. The interfaces at both ends are in the middle of the tape. Try to avoid the size of the edge. The adhesive tape is attached to the film. No obvious bubbles;
3 The film surface at the interface is required to be smooth without obvious wrinkling;
4 Do the identification of the joint position as specified.

Center Surface Slitting And Rewinding Machine

Domestic cutting machine development status and outlets ---

4. Lack of independent innovation, boldly out of their own characteristics
At present, most of the domestic slitter manufacturers are counterfeit foreign products. Most of them are in the German, Japanese, and Taiwanese styles. Their structures are quite different. What's more, they are copied and copied. Not to mention serious violations of the intellectual property rights of others, there is no driving force for China's slitter manufacturing industry, which will bring China a very unfavorable factor in the next round of international market competition. Everyone knows that plagiarizing others will achieve short-term performance in the market, but in the long run, in addition to inhibiting the development of enterprises, it also has a negative impact on related industries, and also limits the film-making enterprises. Towards international competition. I personally believe that in addition to drawing on foreign advanced technology and experience, we must also focus on self-innovation, give full play to the wisdom of Chinese people, and create first-class cutting equipment at the lowest cost, so that filmmakers can make the next round. In the international competitive environment, it brings a greater competitive advantage.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com