Automatic Slitting Machine For Adhesive Tape

Automatic Slitting Machine For Adhesive Tape

Slitting machine operating procedures -

First. When the unwinding machine normally replaces the parent roll
1. The machine is wound up and the machine speed is zero. Press the "machine off" button and all drives are turned off.
2. Press and hold the “core release” button to make the chuck exit the empty core, the empty core is placed on the unloading guide, and then the pneumatic ejector will automatically
Empty the core to the unloading position, release the button, and the steel core is to be transported away by the crane.
3. Press the “Coil Snap” button briefly to retract the cylinder rod at the unwinding position to the receiving position.
4. According to the plan, attach the corresponding mother roll to the double-sided tape, and hang the new mother roll into the V-shaped support that supports the parent roll, and hang the empty roll.
core.
5. Press and hold the “Coil Core Clamp” button to make the card head into the new parent roll until the card head positioning pin is in place and release the button. 6. Adjust the length and diameter of the unwinder on the operation screen (correct the input value if necessary), and replace the parent roll.

Automatic Slitting Machine For Adhesive Tape

Slip axis and air shaft of slitting machine--

 

Sliding gas rising shaft structure characteristics and principle: Slip type gas rising shaft mainly consists of mandrel, airbag, slip sleeve and other parts.
Air enters the inside of the air bag to cause air expansion, pushes each torque group to expand outward, and sets the slip torque value of each torque group according to the inflation pressure, which is convenient for controlling the tension adjustment of each roll of material on the slitter. .
The slip type air rising shaft is mainly used for the striping equipment with high quality requirements and fast speed.
Slip-type air-up shaft technical parameters: slip-type air-up shaft main body outer diameter Φ75mm, action outer diameter Φ78mm, suitable for paper tube Φ76±0.2mm.

Automatic Slitting Machine For Adhesive Tape

The basic knowledge of the slitting machine and its development process --

Basic knowledge and development of slitting machine
       In the modern packaging industry, the slitting machine is a relatively important equipment that is often used before and after printing. The raw materials are mainly cut before printing, such as paper, plastic film and so on. This is a process that raw material manufacturers must complete in order to meet the width requirements of packaging manufacturers such as customers. The slitting machine is used to divide the printing and composite film of a plurality of sets of patterns of a fixed width into a finished film roll to adapt to the subsequent automatic packaging and bag making process.
       With the improvement of flexible packaging automation and consumer goods manufacturers focusing on reducing the inefficiency and pollution of intermediate links, some manufacturers have gradually changed the process and replaced manual packaging with more automated automatic packaging lines. As the demand for coils continues to increase, the position of the slitter is becoming more and more important, and higher requirements are placed on the efficiency of the slitter.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com