Opp Tape Slitting Machine Plastic Core Holder

Opp Tape Slitting Machine Plastic Core Holder

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(2) The purpose, method and characteristics of hardness testing
1. OBJECTIVE: The hardness test method provides a quantifiable means for determining the tightness of the film roll and provides a quantifiable basis for the determination.
Some of the product quality characteristics can be quantitative, and some can not be quantified, can only be qualitative. In the past, our judgment on the tightness of the film winding is only based on the hand feeling. The scale of the judgment is difficult to grasp, and the difference between different inspectors Larger. In actual work, when measuring, the non-quantitative characteristics are usually converted into quantifiable substitute quality characteristics, which are used as the basis for evaluation, inspection and assessment. Film roll hardness testing is a means of quantitative control of the main quality characteristics of the slitting under this guiding ideology. However, it is worth emphasizing that not all quality characteristics must be quantified, especially the film as a process material quality characteristic, there are quantitative measurement characteristics, such as thickness, tensile strength, gloss, etc., also have qualitative characteristics, only the process Subjective judgments such as wrinkles, blots, chromatic aberrations, etc.

2. Several characteristics of film roll hardness
1 Different film varieties, the hand tightness is similar but the hardness data is different. This is because the hand roll is used to squeeze the film roll in a certain area of ??the finger, which is a test of one surface, and when the hardness tester is used, it is a The pin point is pressed against the film roll, which is a detection of a point, and there will be differences between the two;
2 different film varieties have different winding hardness requirements, which are based on the characteristics and uses of various films;
3 The tightness and hardness of the film roll are not completely linear. The most sensitive value is between 87 and 95. When the hardness is as low as 85, the rewinding does not affect the hardness. Similarly, when the hardness is high. At 97 o'clock, the effect of rewinding on the film roll hardness is getting smaller and smaller.
4 Winding hardness is a reference index for quantifying the winding tightness. It only reflects a quality characteristic of the film roll surface and does not reflect the fullness of the film roll. Therefore, the key is to effectively control the film roll tightness. The quality of the product used.

Opp Tape Slitting Machine Plastic Core Holder

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

thirteen. Foreign matter such as dust and small flying insects in the film roll
In the slitting process of the film, the mother roll film needs to be unwrapped and then slit and wound, which creates conditions for the entry of foreign matter. Since many film products themselves need to be in direct contact with foods, medicines, etc., the hygiene requirements are very strict, and the film is not allowed to be attached with foreign objects such as mosquitoes. Once found, it causes major quality complaints and claims, directly causing the company's economic loss and product brand. Damaged and negatively affected, therefore, the environmental cleaning and purification work in the production workshop plays a very important role in ensuring the quality of the film.

Opp Tape Slitting Machine Plastic Core Holder

Domestic cutting machine development status and outlets ---

three. Domestic slitting machine development direction
The development direction of domestic slitting machines should be considered from three aspects:
1. Frame structure: Whether it is a slitting or a second or third slitting, domestic slitting machine manufacturers should invest their energy and study on the frame structure, and actually design a more reasonable slitting machine to get rid of the cutting machine manufacturers. At present, the plagiarism of the slitting machine produced, the research and design of a personalized slitting machine, making the different materials in the structure more detailed, in the next round of international market competition, to provide a favorable weapon for film-making enterprises, At the same time, I also find out the blue ocean for my own company.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com