Mini Rewinder And Slitter

Mini Rewinder And Slitter

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(iv) Effect of film roll tightness on product quality

(5) Coping methods
1. Reasonable principle: Applicable is reasonable, which means that the cutting operator and the quality inspector are too loose according to the winding/
Too tightly influence the degree of influence on different products, adjust the cutting process reasonably, and reasonably grasp the tightness of the film roll to meet the requirements of the use of film products.
2. Ningsong Motight principle: objective when cutting equipment status, product specifications, film performance characteristics, etc.
When the influence of the condition causes the winding tightness to be in an inappropriate degree, the principle of tightness is generally used, because the problem of over-tightening often makes the film unusable, except for the special requirements.
3. The principle of primary and secondary: it means that in the process of slitting production, small groups should be followed to the interests of large collectives.
The principle of benefiting the interests of the company, avoiding the pursuit of high output and high distribution for the purpose of reducing the quality of cutting, all should be based on product quality, maintaining the German crown film brand as the responsibility, effectively completing various production and quality indicators Effectively serve the enterprise and users, and strive to be the best supplier of film.
4. System Management Principles: Refers to the use of systematic, scientific management methods, practical, theoretical, and empirical
The accumulated cutting control method is compiled, and according to the optimal combination of different types of products, width, winding length, season and other external variables and slitting tension, pressure and other internal variables, the document control management is performed to form an operation guidance document. Minimize the influence of subjective factors, reduce the impact caused by insufficient individual ability or excessive dependence on experience, and continuously supplement, optimize and improve the operation guidance documents to meet the needs of system management.

Mini Rewinder And Slitter

Slip axis and air shaft of slitting machine--

 

Sliding gas rising shaft structure characteristics and principle: Slip type gas rising shaft mainly consists of mandrel, airbag, slip sleeve and other parts.
Air enters the inside of the air bag to cause air expansion, pushes each torque group to expand outward, and sets the slip torque value of each torque group according to the inflation pressure, which is convenient for controlling the tension adjustment of each roll of material on the slitter. .
The slip type air rising shaft is mainly used for the striping equipment with high quality requirements and fast speed.
Slip-type air-up shaft technical parameters: slip-type air-up shaft main body outer diameter Φ75mm, action outer diameter Φ78mm, suitable for paper tube Φ76±0.2mm.

Mini Rewinder And Slitter

Domestic cutting machine development status and outlets ---

three. Domestic slitting machine development direction
The development direction of domestic slitting machines should be considered from three aspects:

2. Automation control part: At present, the automation level of the slitting machine produced in China is still at the middle and lower level. Although the domestic control of the original device has been widely used and the price is lower, the domestic slitter manufacturers are far away in use. It lags behind the level of developed countries, especially in the control system, and the lack of organic combination with the structure of the slitting machine and the material to be cut. At this level, most of the domestic slitting machines still stay on the thick lines. The rigor and rationality of the cutting machine control system has not been fully understood. I personally think that the domestic slitting machine manufacturers should start from the above several directions, and find out the method that meets the cutting and cutting principle of the slitting machine and can maximize the use of the functions provided by the hardware.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com