Reasons, countermeasures and effects of BOPP film slitting quality ---
three. Irregular end faces
2. The effect of uneven end faces on usage
Regardless of the type and purpose of the film, the problem of "alignment" is involved, and the user generally uses the form of electric eye tracking to perform alignment. The film roll with irregular end faces, the wrong film layer appears to be bent under the pressure of the package, and the electric eye is difficult to track during use, which affects the use effect, such as inaccurate printing overprinting, misalignment of the bag, and the like. In addition, the film roll with irregular end faces is inconspicuous, and the "selling phase" is poor, which affects the brand image of the product.
Slitting machine operation guide ---
4 operational requirements
4.2.6 The customer is the product of Xiamen Cigarette Factory, and the length of the reel is cut. The weight of the reel label is filled in the theoretical weight of each product (see the attached table for the theoretical weight of each product). After the self-inspection is passed, the scale needs to be scaled one by one. The weight of the product is kept rounded to two digits after the decimal point. The weight of the product registered in the certificate and machine record table should be consistent, and the record should be true and accurate.
4.2.7 The products that have passed the self-test and the internal and external labels are neatly stacked on the tray. The number of products stacked on each tray and each tray is specified in the “Product Printing Process Card” and fixed with a cannula.
4.2.8 If the product does not meet the quality requirements, it needs to be removed or the product quality is in doubt. It is necessary to carry out re-inspection and strictly follow the “Rewinding Machine Operation Guide”.
4.2.9 Timely labeling and isolating materials, products, and materials to be processed at the production site, and taking the squad leader in charge of process identification and traceability operation control and integrated management according to the “identification and traceability control procedures”. After each shift is completed, the production report should be taken to the monitor.
4.2.10 If the product to be treated has not been processed within 2 working days, it should be reported to the workshop with the squad leader for timely disposal.
4.2.11 When the cutting machine is changed, it must be strictly in accordance with the “Regulations on the Management of Shop Closing”.
Domestic cutting machine development status and outlets ---
three. Domestic slitting machine development direction
The development direction of domestic slitting machines should be considered from three aspects:
2. Automation control part: At present, the automation level of the slitting machine produced in China is still at the middle and lower level. Although the domestic control of the original device has been widely used and the price is lower, the domestic slitter manufacturers are far away in use. It lags behind the level of developed countries, especially in the control system, and the lack of organic combination with the structure of the slitting machine and the material to be cut. At this level, most of the domestic slitting machines still stay on the thick lines. The rigor and rationality of the cutting machine control system has not been fully understood. I personally think that the domestic slitting machine manufacturers should start from the above several directions, and find out the method that meets the cutting and cutting principle of the slitting machine and can maximize the use of the functions provided by the hardware.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc