Electrical Adhesive Tape

Electrical Adhesive Tape

Reasons, countermeasures and effects of BOPP film slitting quality ---

ten. Color circle

The factors that cause the film to roll the color circle are:
(1) Contamination equipment is contaminated: due to the pollution of the dust in the cutting workshop, as well as the operation of the equipment in the slitting process and the friction between the membrane and the friction generated by the static electricity, the cutting equipment continuously accumulates more and more dust. When it accumulates to a certain extent and fails to clean in time, it will pollute the slit film roll to form a color circle. In addition, the aging and hardening of the roll skin (sand) debris will also cause the color circle of the film roll to appear.
(2) The environment of the cutting environment is polluted: during the cutting process, due to the influence of some accidental pollution sources, such as the dust on the ceiling of the cutting machine, the exhaust of the diesel forklift, etc., the air is spread to pollute the cutting products. And form a color circle.
In order to effectively reduce the impact of color circles on product quality, the following measures must be taken:
(1) Do 5S work regularly to maintain the sanitation of the workshop and the cleanliness of the machine; (2) It is forbidden to open the doors and windows without sand filter for a long time, and keep the good habit of closing the door;
(3) The contaminated film on the surface of the parent roll must be removed before the film can be cut, so as to avoid the dirt of the surface film from contaminating the cutting machine;
(4) The diesel forklift that requires black smoke is kept away from the surrounding of the workshop to prevent the tail gas pollution from being cut into the products.

Electrical Adhesive Tape

Domestic cutting machine development status and outlets ---

 

5. Strategically lacking deeper cooperation with film-making companies
China has made tremendous changes in the economy in the past decade or so. Film-making enterprises have grown from scratch, from large to strong, and film-making enterprises have been listed on domestic and overseas stock markets, with dozens of them, and the key slitting machine industry is currently facing The small scale and low output value are extremely disproportionate to the scale of the film-making industry. There are two reasons for the above phenomenon: First, for the manufacturing of slitting machine enterprises, the opportunity has not been seized in time, and The knowledgeable film-making enterprises have jointly developed the domestic and foreign slitting machine market. Secondly, from the perspective of film-making enterprises, they have not been able to support some cutting-edge machine enterprises with promising prospects from reducing manufacturing costs, and jointly research and develop production slitting. device. If the film-making enterprises can reduce the purchase cost and operating cost, the price competition faced by today's film-making enterprises will be alleviated, and at the same time, the world-class cutting machine enterprises will be created.

Electrical Adhesive Tape

Domestic cutting machine development status and outlets ---

three. Domestic slitting machine development direction
The development direction of domestic slitting machines should be considered from three aspects:

2. Automation control part: At present, the automation level of the slitting machine produced in China is still at the middle and lower level. Although the domestic control of the original device has been widely used and the price is lower, the domestic slitter manufacturers are far away in use. It lags behind the level of developed countries, especially in the control system, and the lack of organic combination with the structure of the slitting machine and the material to be cut. At this level, most of the domestic slitting machines still stay on the thick lines. The rigor and rationality of the cutting machine control system has not been fully understood. I personally think that the domestic slitting machine manufacturers should start from the above several directions, and find out the method that meets the cutting and cutting principle of the slitting machine and can maximize the use of the functions provided by the hardware.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com