Protection Film Applicator Machin

Protection Film Applicator Machin

1.Extent coating and compound distance, more suitable for thermal paper adhesive produce and other temperature resistance material compound.

2.With high precision and hard strength stand wear and tear die, ensure 200m/min high speed coating efficiency, and extent die life.

Protection Film Applicator Machin

Characteristics of several coating methods -

Wire scraper
These scrapers are made of high-precision cold-drawn round steel wrapped around stainless steel wire. If the wire scraper is rotated by the micro DC motor during the scraping, the effect is better. The wire scraper usually acts directly on the substrate when the glue is applied. However, it is generally only used for the pre-squeegee coating of the smooth roll. A precise squeegee of a comma blade is usually required later.

Air squeegee
The air squeegee mechanism acts on the sizing roller by a uniformly sprayed gas (pressure) flow, which serves the purpose of squeegeeing. The gas (pressure) flow is required to be evenly distributed over the entire width of the optical roll, and this type of scraper is often used for scraping a good fluidity. The scraper has a high precision of scraping, and is currently widely used for coating scraping of whiteboard paper.

Protection Film Applicator Machin

Advances in coating technology
     Advances in coating technology require the continuous development of pigments, adhesives and auxiliaries, and coating auxiliaries are becoming more and more important.
     As the solids content increases, the viscoelastic properties of the coating become more and more important. The interaction between the various components in the coating results in the structuring of the wet coating and exhibits significant viscoelastic characteristics. It would be beneficial if such a structure of the coating could be effectively broken under shear and recovered quickly after metering. On the one hand, it exhibits good runningability, on the other hand, it has less migration of coating adhesive and good coating coverage. However, at very high solids, the viscoelastic structure does not eliminate to the desired level. As a result, problems that may occur with the above-described blade coating and metering size press coating are produced.
With theoretical breakthroughs and technological breakthroughs, WRRM, which can significantly reduce the viscoelastic properties of coatings, has begun to emerge. The addition of this WRRM not only allows the          Coating to exhibit lower viscoelastic characteristics, but also helps to quickly eliminate viscoelastic properties under shear and renders the coating viscoplastic at high shear rates. Such a coating can achieve better blade and metering size press coating runability, and can increase the solids content by 2 to 3%, while the high shear viscosity is the same or lower.
     Spray coating and curtain coating require a new coating aid to achieve good runnability. For example, a wetting agent is required in the coating to allow the spray coated coating to drip and stabilize the curtain coated coating curtain. More importantly, spray coating requires a low coating viscosity, and curtain coating requires a suitable coating elongation viscosity and other properties may also require suitable additives to match.
     In addition, coating auxiliaries also show a trend of versatility. Rheology and water retention modifiers have some of the functions of lubricants, and even some companies claim to function as water repellents; new lubricants show many of the characteristics of rheology modifiers.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com