Coating Machine For Thermal Paper

Coating Machine For Thermal Paper

1.Main engine & pump full-automatic tracking system and constant tension control system, no matter ensure the coating stability, improve the material compound roughness.

2.Double position for taking up roller and full automatic not reduce changing roller, greatly improve the equipment operation and produce efficiency.

Coating Machine For Thermal Paper

Coating machine knowledge handout ---
     Lithium-ion power batteries are new high-energy batteries that have been successfully developed in the 20th century. In the 1970s, it became practical. Because of its high energy, high battery voltage, wide operating temperature range and long storage life, it has been widely used in military and civilian small appliances, such as mobile phones, portable computers, video cameras, cameras, etc., and partially replaces traditional batteries. Large-capacity lithium-ion batteries have been tested in electric vehicles and will become one of the main power sources for electric vehicles in the 21st century, and will be used in satellite, aerospace and energy storage.

With the development of microelectronics technology in the twentieth century, the number of miniaturized devices is increasing, and high requirements are placed on power supplies. Lithium-ion power batteries have entered the practical stage of large-scale production. However, the coater is very close in the cell process of the lithium ion power battery.

    The process of the coating machine: the pole piece substrate placed on the unwinding device is pulled out by the roller, and after automatically correcting, enters the floating roller tension system, adjusts the unwinding tension and enters the coating head, and the pole piece slurry is coated. The system's setup program is applied. The coated wet film enters the oven and is dried by hot air. The dried pole piece is tensioned by the tension system, and the winding speed is controlled to synchronize with the coating speed. The pole piece is automatically corrected by the correcting system to keep the substrate in the The center position is neatly wound by the winding device.

Coating Machine For Thermal Paper

Coating machine knowledge handout ---

The general process flow for pole piece coating is as follows:
Unwinding → tab → traction → tension control → automatic deviation correction → coating → drying → automatic deviation correction → tension control → automatic deviation correction → winding
The coated substrate (metal foil) is discharged from the unwinding device and supplied to the coater. The first end of the substrate is connected to the tensioning device by the traction device after being connected into a continuous belt, and the tension adjusting device and the automatic correcting device are fed into the coating device after adjusting the tension of the film and the position of the film. The pole piece slurry is applied in sections of the coating apparatus in a predetermined coating amount and a blank length. When double coated, the first side coating and the blank length are automatically tracked for coating. The coated wet sheet is fed to a drying system for drying, and the drying temperature is set according to the coating speed and the coating thickness. After drying, the pole piece is subjected to tension adjustment and automatic correction, and is wound up for processing in the next step.
     The key to the coater is to be stable. After a parameter is adjusted, it may last for a whole day. If there are any variables in the coating process, the impact on the battery performance will be great. Although the stability of the coater is important, the mastery of the operator is particularly critical. A good operator not only operates the equipment, knows how to maintain the equipment, but also knows what causes the problem when there is a problem in the coating process. What is the main reason for this problem? How to solve it. It is both a qualified operator and a good equipment maintenanceman.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com