1.Main engine & pump full-automatic tracking system and constant tension control system, no matter ensure the coating stability, improve the material compound roughness.
2.Double position for taking up roller and full automatic not reduce changing roller, greatly improve the equipment operation and produce efficiency.
4. When the coating machine is running, the pole piece is broken.
1. The belt is not right, and the additional pulling force is increased to make the foil strip break in the weak place. 2. Sampling causes damage, resulting in a significant decrease in the tensile strength of the foil strip. 3. The tension is too large, unstable, and there is a sudden change. 4. The air volume is abrupt and the distribution is severely uneven.
5. The temperature is abrupt, which has a great influence on the strength of the aluminum foil. 6. The quality of the foil strip is poor and the edge is notched.
7. The foil strip is seriously deviated and is cut off by the edge of the roll end. V. Other failure phenomena:
1. There are obvious embossing marks and scratches on the pole piece, which are longitudinally distributed: 1) The blade of the scraper roller has a gap or sticks with foreign matter.
2) The coating roller is not easy to use. If the gap material on the coating roller is not scraped off and applied to the substrate again during the coating gap, it will leave obvious marks on the substrate;
3) The axis of the scraper device is out of line with the axis of the coating roller, causing the blade to be inconsistent with the pressure of the coating roller, the shape of the blade is not suitable, the blade elasticity is low, etc.
2. There are obvious cracks on the pole piece: the drying speed is too fast, the oven temperature is too high, and the baking time is too long.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc