It's be mainly used for bopp film gelatinizing producing，The tape is mainly used to seal the box, seal the cover and bind the articles, and can also be used as office supplies.
Note on the use of the coater:
2.2 Method of operation:
1) Start up and clean the equipment according to the equipment operation regulations.
2) Under the manual correction, wear the belt according to the requirements of the belt, and restore the automatic correction after wearing. 3) Set the coating temperature, coating speed, speed ratio, and blade gap according to the following table.
4) Start each section of the drying tunnel fan and heating equipment, and the coating can be applied until the temperature of the drying tunnel reaches the process.
5) Pre-adjust the blade gap according to the film density requirements and experience, and fine-tune with the feeler gauge to adjust the blade after adjustment.
6) Set parameters such as coating length, interval, fiber positioning and fiber inspection according to the requirements of the process drawings and the type of ingredients.
7) Install the chute and baffle, and set the “forbidden coating” parameter to the effective state, and turn on the “stirring” kinetic energy.
8) When coating, first press “coating roller”, then press “coating”, and finally cancel “forbidden coating”;
9) After the first side is applied, the parameters should be adjusted according to the process requirements. After the temperature is stable, the second side can be driven by the vehicle.
10) During coating, the film length, empty foil length, and sheet weight of the first side and the second side should be measured at any time and recorded.
11) When the coating is stopped, first press “Forbidden Coating”, then cancel “Coating”, and finally cancel “Coating Roller”. 12) Short-term parking should keep “stirring” on, “painting roller” on and set its line speed to 500m/min.
13) The coated pole piece should be placed on a special iron frame and marked with the mark, and transferred to the next process.
14) Shut down according to the requirements of the equipment operation rules, clean the coating roller, scraper and utensils with alcohol, and do 5S work.
The scope and main features of the multi-functional coater---
[Scope of application] Electrical tape coating; PE protective film coating; self-adhesive coating; hot melt adhesive coating; multi-functional coating; OPP sealing tape coating; water-based adhesive coating; silicone coating; Functional composite; glazing film coating; tape; shoe coating; transfer film coating; tape coating; coating compounding; special coating; custom coating; production of double-sided adhesive tape, masking tape, instant Sticking, BOPP tape, foam tape, silicone release paper, medical sanitary tape, cloth tape, self-adhesive and other coating and composite products. Multi-purpose coating machine for advertising consumables is suitable for advertising inkjet consumables, digital photo paper, and material coating.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc