Sticky Tape Coating Machine

Sticky Tape Coating Machine


1. It is provided with anilox roller plus blade for coating mode, and also provided with many selection opportunities of anilox roller with various coating amount. 

2. It is provided with separate five-section type constant temperature drying system using infrared stainless steel heating tube plus beating wind, as wellas adjustable interior circulation air draining and suction devices. It is advantageous in strong wind-exit and wind entrance, helping drying thoroughly. 
 

Sticky Tape Coating Machine

Advances in coating technology
     Advances in coating technology require the continuous development of pigments, adhesives and auxiliaries, and coating auxiliaries are becoming more and more important.
     As the solids content increases, the viscoelastic properties of the coating become more and more important. The interaction between the various components in the coating results in the structuring of the wet coating and exhibits significant viscoelastic characteristics. It would be beneficial if such a structure of the coating could be effectively broken under shear and recovered quickly after metering. On the one hand, it exhibits good runningability, on the other hand, it has less migration of coating adhesive and good coating coverage. However, at very high solids, the viscoelastic structure does not eliminate to the desired level. As a result, problems that may occur with the above-described blade coating and metering size press coating are produced.
With theoretical breakthroughs and technological breakthroughs, WRRM, which can significantly reduce the viscoelastic properties of coatings, has begun to emerge. The addition of this WRRM not only allows the          Coating to exhibit lower viscoelastic characteristics, but also helps to quickly eliminate viscoelastic properties under shear and renders the coating viscoplastic at high shear rates. Such a coating can achieve better blade and metering size press coating runability, and can increase the solids content by 2 to 3%, while the high shear viscosity is the same or lower.
     Spray coating and curtain coating require a new coating aid to achieve good runnability. For example, a wetting agent is required in the coating to allow the spray coated coating to drip and stabilize the curtain coated coating curtain. More importantly, spray coating requires a low coating viscosity, and curtain coating requires a suitable coating elongation viscosity and other properties may also require suitable additives to match.
     In addition, coating auxiliaries also show a trend of versatility. Rheology and water retention modifiers have some of the functions of lubricants, and even some companies claim to function as water repellents; new lubricants show many of the characteristics of rheology modifiers.

Sticky Tape Coating Machine

Common micro gravure precision coating method --

Micro gravure coating:
     The coating roller is an anilox roller, and the diameter is generally between Φ20mm-Φ50mm, so it is called micro gravure coating, which is a direction, contact coating method, that is, the rotation direction of the micro coating roller and the film film. The feed direction is reversed and the film is not pressed onto the coating roll by the press rolls. Conventional gravure coating methods, whether direct coating or reverse coating, generally have a back pressure rubber roller and an anilox roller having substantially the same diameter as the rubber. Since the film is pressed between the rubber roller and the anilox roller, there is a possibility that defects such as wrinkles and cracks appear on the coated surface, and the pressure contact points of the two rolls affect the coating quality due to factors such as mechanical and pneumatic pressure.
     While micro gravure coating is a contact coating, contact coating means that there is no back pressure rubber roller, and therefore some potential disadvantages due to back pressure roller pressurization are eliminated.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com