Bopp Tape Machine Hotmelt Coating Machine

Bopp Tape Machine Hotmelt Coating Machine

Suiable for common PET/double-side tape/bopp tape/foam tape/paper sereis/pe protective film.

1.     Automatic tension control.
2.     Gravure coating or semiflexo coating.
3.    Drying tunnel with sectional temperature control and recirculation adjustment.
4.    Steel idle rollers inside the drying hood driven by independent motor.
5.     Inner stainless steel frame covers of the coating section.
6.     preading roller driven by independent motor,positioning pneumatically.

 

Bopp Tape Machine Hotmelt Coating Machine

In the coating process, the coating gap is poor and the pole piece wrinkles are analyzed:

 

3. The front and back are not aligned
(1) Operational aspect: the first side gap is consistent. The operating parameters are not adjusted well. The light eye is blocked. The unwinding pinch roller forgets the clip.
      (2) Equipment: The tension behind the second side is large. The front tension is small.
4 When the middle is turned on, the white space becomes smaller, and the back 3-4 pieces are inaccurate.
Equipment: The tension is not allowed at the beginning of the start. The first side has no memory function. The foil strip slides forward 2-3mm when starting. The tension starts first when starting. The back roller does not turn. The coating head has no pinch roller or is not clamped.
5. The last piece is in a parallel trailing tail
Operation: coating the back roller spacing (the first side is tailed, the second side is not trailing); the back roller is pulled slowly when the machine is stopped 6. The head thickness is thin or the head is thin and thick. Operation: The head and tail parameters are not adjusted well 7 There is no effect on the action
(1) Material: The foil is tight on both sides
(2) Equipment: the foil tension is small and the moment leaves the back roller.
8. Double-sided large piece of whitening phenomenon: the light eye is not sensed. The first side gap is abnormal. The light eye is covered.

Bopp Tape Machine Hotmelt Coating Machine

PET film--

 

(5) PET antistatic film
The world today has entered the information age. Electromagnetic waves of various frequencies and wavelengths fill the entire earth space. These electromagnetic waves will cause different degrees of interference to unshielded sensitive electronic components, circuit boards, communication equipment, etc., resulting in data distortion. Communication is disordered. The static electricity generated by electromagnetic induction and friction on various sensitive components, instrumentation, certain chemical products, etc., such as high voltage discharge due to static accumulation of packaging film, the consequences will be destructive, so the development of antistatic PET packaging film is also very important. The antistatic film is characterized in that an antistatic agent is added to the PET film to form a very thin conductive layer on the surface of the film, and a continuous phase is formed to improve the surface electrical conductivity and cause the generated electric charge to leak as soon as possible. Generally, the surface specific resistance of the antistatic film is ≤109~11 ohms.

(6) PET heat sealing film
Ordinary PET is a crystalline polymer. When the PET film is stretched and oriented, it will produce a large degree of crystallization. If it is heat-sealed, shrinkage deformation will occur, so the ordinary PET film does not have heat-sealing properties. When PET film is used as a commodity packaging, in order to solve the problem of heat sealing, a method of compounding a BOPET film with a PE film or a CPP film is generally adopted, thereby limiting the application of the BOPET film to a certain extent.
In order to solve the heat sealing problem, a three-layer co-extruded heat-sealed PET film, a heat-sealed PET film, has been developed by modifying a PET resin and using an A/B/C three-layer die. Since one side is heat sealable, it can be directly heat sealed and is very convenient to use. The heat-sealed PET film can be widely used in various commercial packaging and card-protecting films

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com