Production Bopp Tape Coating Machine

Production Bopp Tape Coating Machine

Suiable for common PET/double-side tape/bopp tape/foam tape/paper sereis/pe protective film.

1.     Automatic tension control.
2.     Gravure coating or semiflexo coating.
3.    Drying tunnel with sectional temperature control and recirculation adjustment.
4.    Steel idle rollers inside the drying hood driven by independent motor.
5.     Inner stainless steel frame covers of the coating section.
6.     preading roller driven by independent motor,positioning pneumatically.

 

Production Bopp Tape Coating Machine

Second, the length of the coating section changes, the spacing is unstable:
  1. The length of the segment changes greatly (* is shortened) * The variation of the pitch is small (narrowed)
  2) The gap between the back roller and the rubber roller is too small and too tight.
  3) The tension before and after the mismatch, the unwinding is greater than the winding solution
  1) Cleaning roller
  2) Adjust the diagonal block to a fixed position
  3) Adjust with reference to setting parameters
2. The length of the segment changes greatly (* becomes shorter). The pitch changes greatly (larger).
If the length of the head of the pole piece and the head of the next piece are changed greatly (smaller), the tail change between the two pieces of the pole piece is small, so that the solenoid valve (control roller movement) is inflexible.
3. The length of the segment changes greatly (* becomes longer) * The pitch changes greatly (widening)
1) The surface of the back roller and the rear rubber roller are not clean.
2) There is no pinch roller, there may be no pinch or out of control
3) The tension before and after does not match, the winding is larger than the unwinding solution
1) Cleaning roller
2) Increase the pinch roller
3) Adjust with reference to the setting parameters. 1) The surface of the back roller and the rear rubber roller are not clean.

Production Bopp Tape Coating Machine

PET film--

 

(7) PET shrink film
Polyester heat shrinkable film is a new type of heat shrinkable packaging material. Due to its easy recycling, non-toxicity, odorlessness, good mechanical properties, and especially environmental protection, polyester (PET) has become an ideal substitute for polyvinyl chloride (PVC) heat shrinkable film.
However, the ordinary polyester is a crystalline high polymer, and the ordinary PET film can only obtain a heat shrinkage rate of 30% or less by a special process. To obtain a polyester film with a higher heat shrinkage rate, it must also be modified. That is, in order to prepare a polyester film having a high heat shrinkage ratio, it is necessary to copolymerize a common polyester, that is, polyethylene terephthalate. The copolymerized modified PET film has a maximum heat shrinkage rate of more than 70%.
The characteristics of the heat-shrinkable polyester film: it is stable at normal temperature, shrinks upon heating (above the glass transition temperature), and is more than 70% heat shrinkage in one direction. The advantages of heat shrinkable polyester film packaging are:
1 The body is transparent, reflecting the image of the product.
2 tightly packed with good anti-scattering properties.
3 rain, moisture, mildew.
4 no recovery, there is a certain anti-counterfeiting function. Heat shrinkable polyester film is often used in the convenience food, beverage market, electronic appliances, metal products, especially shrinkage labels are its main application areas. Because with the rapid development of PET beverage bottles, beverage bottles such as cola, sprite, and various juices need PET heat shrinkable film to be used as a heat seal label. They are all polyester-based, environmentally friendly materials, and easy to recycle. use.
In addition to being used as a shrink label, heat-shrinkable polyester film has also been used in outer packaging for daily use products in recent years. Because it can protect the packaged goods from impact, rain, moisture, rust, and the product can win the user with a beautifully printed outer packaging, and it can show the good image of the manufacturer. At present, more and more packaging manufacturers use printed shrink film to replace traditional transparent film. Because the printing shrink film can improve the appearance of the product, which is conducive to the advertising of the product, the trademark brand can make a deep impression on the consumer.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com