Glass Fabric Coating Machine

Glass Fabric Coating Machine

1.  150m/min high speed has already reached the international most advanced level.

2.   Rewind and unwind both adopt double position and equip with semi-automatic to connect paper device, The machine can change the rolls of base material nonstop, It will reduce the waste.

3.   When the double sides adhesive tape coat twice, it will effect the quality of products, but the technology of double sides coating meanwhile will solve the questions.

Glass Fabric Coating Machine

BOPA film ---

BOPA is the abbreviation of Biaxially oriented polyamide (nylon) film. Biaxially stretched nylon film (BOPA) is an important material for the production of various composite packaging materials. It is now the third largest after BOPP and BOPET films. Packaging material. Also known as: NY.
Characteristics and main uses of BOPA film
Compared with other films, BOPA film has higher strength than PE and BOPP film. It has lower cost and environmental advantages than EVOH and PVDC film. It is an ideal material for food preservation and fragrance. It is especially suitable for freezing. It is cooked and vacuum packed, and it is non-toxic and harmless. Specifically in the following aspects:
 (1) Good transparency and gloss, and low haze.
 (2) Excellent toughness and puncture resistance.
 (3) Excellent gas (oxygen, nitrogen, carbon dioxide), aroma and odor barrier.
 (4) Excellent oil resistance, grease resistance and chemical solvent resistance.
 (5) It is easy to process, can be coated, metallized, or compounded with other substrates.
 (6) Wide temperature range (-60 ° C - 150 ° C).
 (7) Strong heat resistance.

Glass Fabric Coating Machine

Coating operation process --

Before starting the machine, cut the PET film required for coating according to the size; check whether the coating roller, back roller and knife roller are clean. (Other auxiliary rollers include oven and also check)
? Check whether the belt is correct before and after, and whether the aluminum foil is wrinkled. Once found, correct it in time.
? Open air, open power (total power)
? Turn on the phone, press the touch screen tension button, and correct the button (and set the front and rear correction to auto-correction)
? Set the coating speed (pre-set, and then set according to the viscosity of the slurry and the humidity after drying)
? Click the heating button to preheat the drying tunnel (usually turn on the heating 30 minutes before the coating, the heating temperature can be adjusted according to the actual condition)


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?