Tape Making Machine For Exported

Tape Making Machine For Exported

1.  150m/min high speed has already reached the international most advanced level.

2.   Rewind and unwind both adopt double position and equip with semi-automatic to connect paper device, The machine can change the rolls of base material nonstop, It will reduce the waste.

3.   When the double sides adhesive tape coat twice, it will effect the quality of products, but the technology of double sides coating meanwhile will solve the questions.

Tape Making Machine For Exported

Note on the use of the coater:

1.3 shutdown procedure
1) Confirm that the coated pole piece has been wound up and then stop.
2) Turn off the heater power of the equipment and stop the drying fan and other fans when the temperature of each section drops below 60 degrees Celsius;
3) Stop the compressed air.
4) Disconnect power from the correcting cabinet and control cabinet.
1.4 Notes
1) Operators must undergo pre-job training and pass the assessment before they can be employed, and should strictly abide by these operating procedures.
2) Except for the necessary maintenance personnel, it is strictly forbidden for non-personnel personnel to operate the equipment or change the setting parameters.
3) The roller speed ratio is recommended to be set within the range of 1.3 to 1.5.
4) It must be confirmed that the air heater has not been activated until the drying fan has been started.

Tape Making Machine For Exported

Masking tape coating machine ---
main feature:
1. Professional design and manufacture according to the user's production process and substrate characteristics;
2. Special high-efficiency drying oven to improve drying efficiency and reduce energy consumption;
3. Temperature and tension segmentation control to meet different process requirements;
4. PLC programmable control of the whole machine, realizes precise synchronous control and multi-point control, and is easy to operate and maintain.

The main technical parameters: 
1. Effective coating width: 1300/1600/2000mm;
2. Mechanical speed: 10-100M/min;
3. Effective receiving / unwinding diameter: ф1000mm;
4. Drying box length: depending on the user's process.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?