Water Based Glue Machine

Water Based Glue Machine

1. High precision alloy steel die head make sure the customer can get the best coating effection.

2. Total Machine is controlled by  PLC.Precision control coating speed and glue amount.

3. Increase the film function in some glue or substrate is not suitable for direct knife coating that realize 2 kinds of craftwork (knife coating and film coating.) on one machine.

Water Based Glue Machine

Characteristics of several coating methods -


Hot melt adhesive coating
The coating device mainly heats and melts the solid type glue, and directly sprays the glue on the substrate through the coating die by hydraulic loading. Hot melt adhesive coating is a new technology developed in the past ten years. Hot melt adhesive coating does not require drying equipment and has low energy consumption. Hot melt adhesive is 100% solid rubber component and does not contain toxic organic solvents. Ordinary sizing coatings use toxic organic solvents (such as benzene) to dilute the glue, and the toxic gases caused by them are extremely harmful to the operator.
Hot melt adhesive coating has its unique advantages over conventional size coating. Hot melt adhesive coating is a green and environmentally friendly coating technology. It has high production speed, high efficiency, low cost, small equipment footprint and short investment recovery period. It is an economical investment project and has been widely used in packaging. , medicine, automotive, clothing, electronics and other industries. Hot melt adhesive coating has great market development prospects, and the development ratio of this technology in the market will become larger and larger, and new application fields will continue to emerge.

Squeegee method and application
In the coating process, the glue is often uneven, which requires a certain scraping mechanism to evenly scrape the glue. The scraping mechanism mainly includes a stainless steel scraper, a comma scraper, a scraping bar, a wire scraper, an air jet scraper, and the like.

Water Based Glue Machine

Advances in coating technology
     Advances in coating technology require the continuous development of pigments, adhesives and auxiliaries, and coating auxiliaries are becoming more and more important.
     As the solids content increases, the viscoelastic properties of the coating become more and more important. The interaction between the various components in the coating results in the structuring of the wet coating and exhibits significant viscoelastic characteristics. It would be beneficial if such a structure of the coating could be effectively broken under shear and recovered quickly after metering. On the one hand, it exhibits good runningability, on the other hand, it has less migration of coating adhesive and good coating coverage. However, at very high solids, the viscoelastic structure does not eliminate to the desired level. As a result, problems that may occur with the above-described blade coating and metering size press coating are produced.
With theoretical breakthroughs and technological breakthroughs, WRRM, which can significantly reduce the viscoelastic properties of coatings, has begun to emerge. The addition of this WRRM not only allows the          Coating to exhibit lower viscoelastic characteristics, but also helps to quickly eliminate viscoelastic properties under shear and renders the coating viscoplastic at high shear rates. Such a coating can achieve better blade and metering size press coating runability, and can increase the solids content by 2 to 3%, while the high shear viscosity is the same or lower.
     Spray coating and curtain coating require a new coating aid to achieve good runnability. For example, a wetting agent is required in the coating to allow the spray coated coating to drip and stabilize the curtain coated coating curtain. More importantly, spray coating requires a low coating viscosity, and curtain coating requires a suitable coating elongation viscosity and other properties may also require suitable additives to match.
     In addition, coating auxiliaries also show a trend of versatility. Rheology and water retention modifiers have some of the functions of lubricants, and even some companies claim to function as water repellents; new lubricants show many of the characteristics of rheology modifiers.


Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?