Slitting Machine For Scotch Tape

Slitting Machine For Scotch Tape

Tape slitting machine principle:
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.

Slitting Machine For Scotch Tape

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

One. Winding too loose / too tight
     Among the many factors affecting the quality of product use, the tightness of the film roll is critical, and the tightness control is moderate, which not only ensures the quality of the slitting, but also compensates for the quality defects caused by the film making process, but the tightness of the winding. Improper control will inevitably directly affect the quality of the product. As a metaphor, if we compare the film formation to the process of producing rice, the cutting is the cook of the rice. The quality of the rice is important, but the cooking time can not be sloppy, in the various control indicators of the cutting. The grasp of the tightness of the winding is like grasping the amount of rice water used in the cooking process. The lack of water and water must have a direct impact on the quality of the rice.

(1) Several methods for judging the tightness of winding
1. Acupressure test method: the examiner presses the surface or end face of the film roll by hand to judge
Whether the volume tightness is suitable. This is a commonly used test method. The advantages are fast, intuitive, and highly reliable, but it requires some experience, lack of data support, and difficulty in recording. 2. Hardness measurement method: The hardness is measured by using a durometer, and the data is spoken.
The advantages are scientific, quantitative, convenient recording, and less disputes on judgment differences. The disadvantage is that only the surface of the film roll can be detected, and the facts inside the film roll cannot be reflected.
3. Visual analysis method: judging the film roll by visually changing the color change of the end face of the film roll or the shape of the end face
For the same product, the darker the end face, the tighter the winding, especially at the near paper tube. The tightness of the winding is often black; for the end shape, the star is the best. According to the judgment, the appearance of a single star may be the phenomenon of tightness of the film, and the occurrence of double stars should be caused by the tightness of the film. The advantages of visual methods are fast and accurate, but they can only analyze some individual winding problems, which is not comprehensive enough.
4. Process tapping method: tapping the membrane surface with a rigid object during the slitting and winding process, through the feel
And the sound to judge the tightness of the film roll, this method can track the film winding tightness from the inside to the outside, the accuracy and credibility are higher, but it will damage the film surface and have certain operation. Dangerousness, we have forbidden to use this method to test the tightness of film roll since 2000. This method is currently only suitable for non-conventional occasions such as product development, slitting control analysis.
Although the current tapping method is not allowed, we use a combination of acupressure test, hardness measurement and visual analysis in the daily slitting process. There is sufficient means to accurately determine the tightness of the winding. Judge. Since the hardness test method is less used in the film industry, the time for using this method is also short. The test method is introduced below.

Slitting Machine For Scotch Tape

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(iv) Effect of film roll tightness on product quality

2. The volume is too loose:
1 Shift: Due to the looseness of the winding, the film roll is easy to move in series and shifts. If the degree is serious, it cannot be used.
2 Core-pulling: Due to the looseness of the winding, the film roll has serious end face misalignment near the paper tube during the loading or unloading or use process, commonly known as “core pulling”, which affects the appearance and use effect of the product.
3 The film wrinkles produced by the loosening of the rolls and the pit lines (stars) formed by the tightness of the inner pines affect the appearance quality and the use effect of the products to some extent.
4 Face wrinkles: Due to the looseness of the winding, the point support force of the end face of the film roll during the movement is reduced, and the fish scale-like end face wrinkles are easily generated.
5 Eccentricity: If the winding is too loose, the film roll will be eccentric (elliptical), and the unwinding tension will be uneven during the unwinding process, which will affect the use effect, especially the printing overprinting effect.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com