Slitting Rewinding Machine For Bopp Tape

Slitting Rewinding Machine For Bopp Tape

Tape slitting machine principle:
1. The paper slitting machine shall carry out the fixed length slitting processing of the whole roll or the whole raw material, such as plastic packaging materials, packaging carton, steel plate, film, leather, wood chip, etc., and the fixed length slitting control shall be used.
2. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
3. The slitting control of the paper slitter is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, it does not stop. The slitting signal is dynamically slitted during the material movement process.

Slitting Rewinding Machine For Bopp Tape

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(3) Causes of loose/overtightening of the film roll
1. The influence of the cutting parameters (winding sheet / pressure curve setting factors, etc.);
2. Effect of film properties (stiffness, thickness, single/double corona surface, smoothness, static electricity, etc.)
Ringing, the slitting parameters must be set according to the film with different characteristics);
3. The effect of the winding speed (when the winding speed is slower, the more time the slitting process is to discharge the air in the film roll, the tighter the film winding is);
4. Product specifications (width, length, collocation, etc.);
5. The influence of the performance of the slitting equipment (adjustability, stability, operability, etc.);
6. The influence of operational factors (professional level, operational skills, job responsibility, etc., generally expressed in the insertion
7. The quality of the work is wrong, such as poor air-suction, rewinding card head position, poor adjustment, and unwinding roller pressure; The influence of environmental factors (temperature, humidity, etc.);
8. Influencing factors of the appraisal system (Operator considers the appraisal of the secondary processing and rewinding indicators in the workshop, and often adopts the coping method of winding up and not loosening, which is one of the factors that cause the film roll to be over-tightened);

Slitting Rewinding Machine For Bopp Tape

Causes, countermeasures and effects on the quality of BOPP film slitting quality ---

(iv) Effect of film roll tightness on product quality

(5) Coping methods
1. Reasonable principle: Applicable is reasonable, which means that the cutting operator and the quality inspector are too loose according to the winding/
Too tightly influence the degree of influence on different products, adjust the cutting process reasonably, and reasonably grasp the tightness of the film roll to meet the requirements of the use of film products.
2. Ningsong Motight principle: objective when cutting equipment status, product specifications, film performance characteristics, etc.
When the influence of the condition causes the winding tightness to be in an inappropriate degree, the principle of tightness is generally used, because the problem of over-tightening often makes the film unusable, except for the special requirements.
3. The principle of primary and secondary: it means that in the process of slitting production, small groups should be followed to the interests of large collectives.
The principle of benefiting the interests of the company, avoiding the pursuit of high output and high distribution for the purpose of reducing the quality of cutting, all should be based on product quality, maintaining the German crown film brand as the responsibility, effectively completing various production and quality indicators Effectively serve the enterprise and users, and strive to be the best supplier of film.
4. System Management Principles: Refers to the use of systematic, scientific management methods, practical, theoretical, and empirical
The accumulated cutting control method is compiled, and according to the optimal combination of different types of products, width, winding length, season and other external variables and slitting tension, pressure and other internal variables, the document control management is performed to form an operation guidance document. Minimize the influence of subjective factors, reduce the impact caused by insufficient individual ability or excessive dependence on experience, and continuously supplement, optimize and improve the operation guidance documents to meet the needs of system management.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com