Bopp Color Tape Slitter Rewinder

Bopp Color Tape Slitter Rewinder

Slitting machine features:
     The Guolian model slitter is suitable for narrow-width paper slitting. It has automatic meter counting, counting, set length, quantity automatic shutdown, unwinding by photoelectric automatic correction control and other functions. The whole machine is characterized by compact structure, high speed, high efficiency, accurate cutting, simple operation and stable operation.

Bopp Color Tape Slitter Rewinder

Reasons, countermeasures and effects of BOPP film slitting quality ---

eleven. Width deviation is too larg

Each user orders the film according to the shrinkage rate of the processed object and the film to accurately calculate the film width, try to get the lowest value to reduce the production cost. Therefore, the slit film width is too small, it is very easy to cause users. The processing width is not enough, and the film width is too large, which causes waste on the user's materials. In both cases, the user's complaint or even compensation may be caused. In actual operation, although the film width has a certain tolerance, the film width should be adjusted as much as possible on the standard width of the production construction sheet.
     Excessive deviation of film width is generally caused by human factors. Therefore, in the process of slitting, we need to detect the film width in the first time after conversion, transfer of specifications, transfer, equipment cleaning, equipment maintenance, adjustment of the tool holder, and replacement of the blade. The problem of preventing excessive deviation of the film width occurs.

Bopp Color Tape Slitter Rewinder

Reasons, countermeasures and effects of BOPP film slitting quality ---

twelve. Interface quality problem (poor interface quality, interface identifier does not match)

2. Interface identifier
Due to the large thickness of the film interface, the film roll for some applications must be properly handled at the interface to avoid unnecessary problems, such as slowing down, increasing the gap between the coating blade, and printing the offset plate. The interface products must be identified as necessary to facilitate customer identification and internal management.
1 The color of the adhesive interface is generally beige, special requirements are used according to the regulations. For example, Shanghai Ziquan requires the use of black adhesive tape; the marking method of the joint position is operated according to the regulations, such as Zhuhai Zhongfu Pearl Film, Shenzhen Ruimei The hot film is required to be marked at the ends of the interface with yellow paper dust protruding from the end of the film roll by about 1 cm; other special marks are operated according to the requirements of the production tribe.
2 Require the slitting workshop to mark the length number of the joint product without special requirements after the length of the label in the length column of the package label, and mark the “buter” mark on the note bar of the computer, and mark “+” on the remark column. Marking, pearl film and imitation paper film and exporting pearl film should indicate the length of each product before and after the joint on the length column of the product specification. For special requirements, the relevant marking work should be done according to the regulations (such as Shanghai Ziquan product port). The rate of less than or greater than 25% requires the number of interface products on each board product).

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com