Bopp Printed Tape Slitter Rewinder

Bopp Printed Tape Slitter Rewinder

Maintenance and maintenance of the slitter:
     Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.

Bopp Printed Tape Slitter Rewinder

Reasons, countermeasures and effects of BOPP film slitting quality ---

 

six. Burr

The raw edge product not only affects the appearance, but also directly affects the use. The edging product is observed with a magnifying glass. The edge of the film is jagged. The film roll is prone to breakage during use, and the consequences are very serious. For example, if the printed film breaks during the printing process, the ink will be caused. Splash, need to clean the machine and the ground, and then lead the film, re-coloring and other processes, production of physical and working loss; if the tape film breaks during the coating process, it is necessary to open the oven more than ten meters, re-introduction Membrane, turn off the oven, heat up and reproduce. These are things that users are very annoying and we must pay attention to.

In addition, we must pay attention to the protection of the end face during the moving process of the film roll, the film end face gap caused by the operation accident, and the gap has high concealment, the problem is difficult to find and flow to the user, the product will be Use has a greater impact.

Bopp Printed Tape Slitter Rewinder

Reasons, countermeasures and effects of BOPP film slitting quality ---

nine. Scratch
      Whether the slitting and scratching can be compared and determined by the film surface before and after the slitting, there are various reasons for the scratching of the membrane surface, and the analysis should be based on the appearance of the scratch, such as short-line scratching. The difference of the speed ratio of each drive roller exceeds the process setting requirement, and it needs to be carefully tested and adjusted. If the film surface scratch occurs continuously, the film on the slitter should be inspected for whether it touches the fixed object or cuts each. Whether the roller adheres to dirt such as fine sand grains scratches the film surface.
Scratch is the appearance quality problem of the film, which directly affects the quality appearance of the deep-processed product. Therefore, it is not allowed to exist in the film quality control standard. The slitting process finds that the scratching problem must be carefully checked and quickly eliminated. Since the scratch on the film surface is an irreversible appearance quality problem, it is not allowed to operate the disease when the film surface is scratched, so as to avoid the continuous occurrence of the problem.
      

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com