Automatic Adhesive Tape Slitting Machine

Automatic Adhesive Tape Slitting Machine

Maintenance and maintenance of the slitter:
     Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscientific operation methods; every two weeks to the machine Make a comprehensive cleaning and inspection; if the automatic slitting machine is stopped for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the automatic slitting machine is deactivated for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, carefully clean the equipment, and wipe the exposed friction surface and add lubricant.

Automatic Adhesive Tape Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

eleven. Width deviation is too larg

Each user orders the film according to the shrinkage rate of the processed object and the film to accurately calculate the film width, try to get the lowest value to reduce the production cost. Therefore, the slit film width is too small, it is very easy to cause users. The processing width is not enough, and the film width is too large, which causes waste on the user's materials. In both cases, the user's complaint or even compensation may be caused. In actual operation, although the film width has a certain tolerance, the film width should be adjusted as much as possible on the standard width of the production construction sheet.
     Excessive deviation of film width is generally caused by human factors. Therefore, in the process of slitting, we need to detect the film width in the first time after conversion, transfer of specifications, transfer, equipment cleaning, equipment maintenance, adjustment of the tool holder, and replacement of the blade. The problem of preventing excessive deviation of the film width occurs.

Automatic Adhesive Tape Slitting Machine

Reasons, countermeasures and effects of BOPP film slitting quality ---

twelve. Interface quality problem (poor interface quality, interface identifier does not match)
1. Interface requirements
Due to poor interface, the quality of the film roll may be broken or wrinkled, which may cause adverse effects in the user's use. Therefore, the film interface must be connected to the specified specification to ensure the joint quality of the interface. Specific requirements are as follows: 
1 The two sections of the joint are cut and flattened horizontally, and the beige (or other specified color) adhesive tape with a width of 72 mm is firmly adhered to the front and back sides of the film;
2 In order to improve the interface quality, the film interface is required to be straight and balanced with the paper tube direction, and the interface is required to be flush and wavy. The interfaces at both ends are in the middle of the tape. Try to avoid the size of the edge. The adhesive tape is attached to the film. No obvious bubbles;
3 The film surface at the interface is required to be smooth without obvious wrinkling;
4 Do the identification of the joint position as specified.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com