Instructions for the operation of the tape cutter.
The tape cutter is operated differently than the disc tape cutter, because they are different tape cutter models, and the shape is also very different. This tape cutter is ready to cut.
If the cut tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.
The tape cutter has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).
The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be put into the tape cutting machine, the tape head should be pulled, then the power is turned on, and the switch is turned on.
Set according to the requirements, press the yellow button (start button) on the right after setting, the tape cutting machine starts to run and cut. The tape cutter cuts only a piece of tape at a time, and spits the cut tape out at the gate.
The sensor is installed at the gate. If the tape is not removed, the tape cutter will remain in a stagnant state. When we remove the tape, the tape cutter will automatically start and cut the next tape. Cycle back and forth.
The relationship between the tape cutting machine and the tape -
2: The tape mainly includes single-sided tape, double-sided tape, industrial tape, electronic tape, medical tape, acrylic tape, rubber tape, and silicone tape. The main substrate of the tape is paper, cloth, film, etc.; the support of the tape cutter is mainly a release paper, a release film, etc.; the adhesive has an acrylic adhesive, and a rubber adhesive. Substrate and support physical property testing focuses on basis weight, thickness, elongation, and release force; the focus of adhesive property testing is viscosity solid content. The physical properties of the tape are measured by coating amount, coating thickness, adhesion, holding power, adhesion from the back surface, drawing force, initial adhesion, weather resistance, heat resistance, solvent resistance, electrical conductivity, flame resistance, and the like.
How to choose a self-adhesive laser cutting machine ---
Small stickers, in many cases, are important manifestations of image and brand, which play an important role in reflecting product quality and causing consumers to purchase. Self-adhesive cutting solutions are constantly being optimized. From manual, die-cutting to laser cutting, how do we choose a self-adhesive laser cutting machine?
Self-adhesive is also called self-adhesive label material. It is a composite material with paper, film or special material as the fabric, adhesive on the back and silicone coated paper as the base paper. Packaging, commodities, chemicals, logistics, medicine, electronics and electrical appliances... More and more industries are applying stickers, and various packaging also use self-adhesive labels. Today, self-adhesive label cutting solutions have evolved from early manual cutting, die-cutting machines, and slitting machines to cutting with more advanced self-adhesive laser cutting machines.
Undoubtedly, self-adhesive laser cutting is a more fashionable and cost-effective solution. How to choose excellent laser equipment is the key. Self-adhesive laser cutting machine and laser engraving machine are widely used, powerful in function, simple in operation, and good in cutting products. They are listed as the preferred laser equipment products by many industries. Self-adhesive laser cutting machine, laser cutting machine tailored for self-adhesive cutting, has driven the development of the marking industry, and is a typical example of laser penetration into daily life.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc