Foam Tape Machine

Foam Tape Machine

Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.

Foam Tape Machine

How to choose a self-adhesive laser cutting machine ---

       Small stickers, in many cases, are important manifestations of image and brand, which play an important role in reflecting product quality and causing consumers to purchase. Self-adhesive cutting solutions are constantly being optimized. From manual, die-cutting to laser cutting, how do we choose a self-adhesive laser cutting machine?
Self-adhesive is also called self-adhesive label material. It is a composite material with paper, film or special material as the fabric, adhesive on the back and silicone coated paper as the base paper. Packaging, commodities, chemicals, logistics, medicine, electronics and electrical appliances... More and more industries are applying stickers, and various packaging also use self-adhesive labels. Today, self-adhesive label cutting solutions have evolved from early manual cutting, die-cutting machines, and slitting machines to cutting with more advanced self-adhesive laser cutting machines.
Undoubtedly, self-adhesive laser cutting is a more fashionable and cost-effective solution. How to choose excellent laser equipment is the key. Self-adhesive laser cutting machine and laser engraving machine are widely used, powerful in function, simple in operation, and good in cutting products. They are listed as the preferred laser equipment products by many industries. Self-adhesive laser cutting machine, laser cutting machine tailored for self-adhesive cutting, has driven the development of the marking industry, and is a typical example of laser penetration into daily life.

Foam Tape Machine

Tape cutter model difference ---
The tape cutter GL-3700 is a disc tape cutter that does not have any curling when cutting the tape. The tape is cut very neatly and tidyly; the tape cutter does not need to adjust the blade; there is a handle in the middle of the machine. It is used to adjust the length of the tape cutting. The closer the handle is to the disc, the shorter the length of the tape cutting. Conversely, the farther away, the longer the tape cutting length; the cut tape will be automatically pasted on the disc. It is convenient for staff to use.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com