Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.
Tape cutting machine --- function
According to the application range of the tape cutter, the general tape cutter has the following functions: it can cut different materials such as tape, adhesive tape and protective film. You can simultaneously clamp two rolls of tape while cutting. Memory function, turn it off and then turn it on, and still save the original data. Cyclic cutting function, free to set different lengths of cyclic cutting, can cut different thickness of adhesive tape. The safety performance is high. The safety baffle is designed at the cutter. When the machine is blocked, the alarm device works automatically. Even if the blockage is cleared, the machine will not work immediately. You must press the start button again to continue working. Tape cutters are usually designed with no rollers.
Laser tape cutting machine---
Laser tape cutting machine is a new technology that has been used in various industries, including tape, metal cutting, glass cutting and engraving. A laser is a kind of light, like its electroluminescence in nature, is caused by the transition of atoms (molecular or ion kites) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light. The laser depends on spontaneous emission only in the initial very short time. The subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directionality. , engraving machine, extremely high luminous intensity. At the same time, the laser has high coherence, high strength and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated onto the processed object through the collecting mirror, so that the processed object (surface) is subjected to strong heat energy and the temperature is sharply increased. This point is rapidly melted or vaporized due to high temperature, and the trajectory of the laser head is used to achieve the purpose of processing.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc