Kraft Paper Tape Slicer

Kraft Paper Tape Slicer

Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.

Kraft Paper Tape Slicer

GL-709 tape cutting machine

-------Cutting pvc tape, bopp tape,PE, PET, EVA, masking tape , foam tape ,double sided tape etc.

 

Product Description

 

1. Japan Mitsubishi Automatic PLC with touch screen control panel , 20 modes for size

   pre-setting each time & auto changing when cutting.  

2. Auto liquid silicon water spray cooling system: to avoid the adhesive sticking on the blade

    and ensure the smooth cutting.

3. AC motors for cutting blade and cutting shaft with inverters speed changing .

4. Positioning system for cutting: servo motor to control more accurate position.

5. Four shafts, double blades .

Kraft Paper Tape Slicer

GL-706 bopp adhesive tape cutting machine

-------Cutting pvc tape, bopp tape,PE, PET, EVA, masking tape , foam tape ,double sided tape etc .

 

Product Description

 

1.  Blade Feeding: straight blade feeding ,manually pushing the blade to cut the tape.

2.  Use a hexagonal shaft for making the cutting size. This shaft is under the blade supporter. It has a fixed size on every side of this shaft. Different cutting size can be achieved by moving the shaft.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com