Foam Tape Slicer

Foam Tape Slicer

Tape Cutting Machine-
First, the precautions before installation and installation:
1. Install the equipment in a dry, clean and well ventilated place.
2. The equipment should be protected and connected to zero, that is, the casing part is connected with the neutral line in the three-phase four-wire (the product with the power plug is connected to the factory).
3. The power supply in the workplace should be normal, without excessive fluctuations, otherwise the equipment cannot guarantee normal operation.
4. Steps for equipment installation:
a. The power incoming line is connected to the user-supplied three-phase switch of suitable capacity. The three-phase switch shall be fitted with a fuse that meets the requirements and shall not be arbitrarily amplified. The three-phase switch should be dedicated to the cutting machine.
b. The gas source is connected to the inlet end of the filter pressure reducing valve on the rear plate of the cutting chassis through the gas supply pipe, that is, facing the left side joint of the pressure gauge.
c. Clamp the working ground clamp of the cutting machine (the positive output end of the cutting power supply) on the workpiece.

Foam Tape Slicer

PVC electrical tape cutting machine:

Product Description

Application :

PVC electrical tape cutting machine for cutting  BOPP, OPP, Cellophane tape, 3M, Mylar, Kapton, EVA,PE, PVC, Masking tape, Double-side adhesive tape, Kraft tape , Protective film, Duct tape , film roll etc. Auto Jumbo Roll Cutting Machine  including the Semi-automatic  roll cutting machine single shaft roll cutting machine , double shaft roll cutting machine, YL-708 Fully Automatic 4 Shaft Tape Roll Cutting Machine.

 

Feature:

 For fully automatic roll cutting machine :

1. Machine with PLC control and color touch screen, easy and convenient to operate to worker,also improves the quality of the finished cut roll; 

2. Can accoring to customer's requirments to set 10 differents cutting width and the angle  of cutting.( if cutsomer needed maximum can reach 20 types);

3. with automatic spary silicone oil cooling system, thus the finished products with smooth and beautiful cutting surface; 

4. Cutter with servo-motor control, apply  for different material roll, also machine cutter move  forward stablly and smoothly.

5. Cutter and the main shaft adpots AC motor.  The high precision ball screw work with servo motor and  he straight liner slide rail, machine running smoothly and cutting the material with high precision.

Foam Tape Slicer

Ultrasonic Tape Cutting Machine:

Features:

1. Using ultrasonic cutting and edge treatment for melting, so smooth, no rough edges.

2. PLC touch-screen, automatic feed, the computer count, high precision, speed and adjust the length of simple and quick, efficient.

3. Widely been used in gifts belt, nylon belt strip, strip Ribbon, ribbon bar, such as chemical fiber cut straight knife, knife ramps, such as shape Dovetail

4. This machine can cut different shapes of the products, just need to change the cut knife. And also can cut Like: 

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com