Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
Tape cutting machine --- function
According to the application range of the tape cutter, the general tape cutter has the following functions: it can cut different materials such as tape, adhesive tape and protective film. You can simultaneously clamp two rolls of tape while cutting. Memory function, turn it off and then turn it on, and still save the original data. Cyclic cutting function, free to set different lengths of cyclic cutting, can cut different thickness of adhesive tape. The safety performance is high. The safety baffle is designed at the cutter. When the machine is blocked, the alarm device works automatically. Even if the blockage is cleared, the machine will not work immediately. You must press the start button again to continue working. Tape cutters are usually designed with no rollers.
Tape cutter market--
In the domestic market, mainly domestic manufacturers compete with Korean and Japanese manufacturers. The price of tape cutting machines of Japanese and Korean brands is much higher than domestic brands. Most of the international brands currently on the market are not original but domestic OEM products. The domestic mainstream tape cutting machine brands include Hongjin, Yaesu, HONGJIN, Z-Cut, ELM, Autotek and other brands, covering major manufacturers such as China, Japan and Korea.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc