Paper Gum Tape Making Machine

Paper Gum Tape Making Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Paper Gum Tape Making Machine

Laser tape cutting machine---
Laser tape cutting machine is a new technology that has been used in various industries, including tape, metal cutting, glass cutting and engraving. A laser is a kind of light, like its electroluminescence in nature, is caused by the transition of atoms (molecular or ion kites) and is caused by spontaneous radiation. Although the laser is light, it is obviously different from ordinary light. The laser depends on spontaneous emission only in the initial very short time. The subsequent process is completely determined by the excitation radiation, so the laser has a very pure color and almost no divergent directionality. , engraving machine, extremely high luminous intensity. At the same time, the laser has high coherence, high strength and high directivity. After the laser is generated by the laser, it is transmitted by the mirror and irradiated onto the processed object through the collecting mirror, so that the processed object (surface) is subjected to strong heat energy and the temperature is sharply increased. This point is rapidly melted or vaporized due to high temperature, and the trajectory of the laser head is used to achieve the purpose of processing.

Paper Gum Tape Making Machine

Guolian Machinery -- GL-5000 Tape Cutting Machine
The operation method of GL-5000 is different from that of disc tape cutter, because they are different types of tape cutters, and the shape is also very different. This tape cutter is ready to cut, if cut. If the tape is not removed in time, the tape cutter will stop cutting until the cut tape is removed, which is more flexible.

The tape cutter GL-5000 has a large knife edge, so you can cut all the tapes within the width range, and you can cut two tapes with a small width at the same time (the width is added to the tape cutter parameters).

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com