Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
utomatic tape tape cutting machine ---
With the continuous development of industrial technology, traditional manual work such as cutting tape is now replaced by machines. Tape cutting machine is also called adhesive paper cutting machine and tape machine.
Cutting length: between 3-999mm
Cutting width: between 3-100mm
Such an automatic adhesive tape cutting machine can be used in the production and packaging processes of electronics, machinery and other factories: labeling, fixing, etc., can greatly improve work efficiency, save labor costs, and ensure the quality of work.
Automatic tape cutting machine --- Working principle
The working principle of the tape cutting machine is actually the working principle of the laser tape cutting machine, and the technology applied by the laser tape cutting machine is a new cutting technology. Now this technology has been applied to various industries, including tape and metal cutting. A wide range of fields such as glass cutting and engraving.
The laser we usually know is actually a kind of light. It has the same emission principle as other light in nature, but the structure is very different. Although the laser is also light, the laser is dependent on spontaneous emission in the initial very short time. The subsequent process is completely determined by the excitation radiation. Therefore, the laser has a very pure color, almost no divergent directivity, and has a very high luminous intensity. . Through its high coherence, high strength, and high directivity, when the light is irradiated on the tape, the surface of the tape is subjected to strong thermal energy, causing the temperature to rise sharply, forming a rapid melting or vaporization, and completing the cutting.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc