Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
adhesive tape jumbo roll cutting machine:
This adhesive tape jumbo roll cutting machine is mainly used to cut the adhesive plastic tape without unwinding the tape roll. It is workable to cut ahesive BOPP tape, PVC tape, PE tape, masking tape, double sides adhesive tape, foamed adhesive tape, teflon tape, cloth tape, surgical adhesive tape, industrial electrical tape and etc.
PVC electrical tape cutting machine for cutting BOPP, OPP, Cellophane tape, 3M, Mylar, Kapton, EVA,PE, PVC, Masking tape, Double-side adhesive tape, Kraft tape , Protective film, Duct tape , film roll etc. Auto Jumbo Roll Cutting Machine including the Semi-automatic roll cutting machine , single shaft roll cutting machine , double shaft roll cutting machine, YL-708 Fully Automatic 4 Shaft Tape Roll Cutting Machine.
For fully automatic roll cutting machine :
1. Machine with PLC control and color touch screen, easy and convenient to operate to worker,also improves the quality of the finished cut roll;
2. Can accoring to customer's requirments to set 10 differents cutting width and the angle of cutting.( if cutsomer needed maximum can reach 20 types);
3. with automatic spary silicone oil cooling system, thus the finished products with smooth and beautiful cutting surface;
4. Cutter with servo-motor control, apply for different material roll, also machine cutter move forward stablly and smoothly.
5. Cutter and the main shaft adpots AC motor. The high precision ball screw work with servo motor and he straight liner slide rail, machine running smoothly and cutting the material with high precision.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc