Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
Film /Paper/ fabric roll cut tape slitting machine is used for slitting or cutting various widths of materials into a small tape roll.
It is suitable for slitting or cutting: cloth, non-woven fabric, tent, umbrella, sponge foam, leather, reflective material, plastic, paper, double side adhesive tape, acetate various fabric, reinforced tape, electric conductive fabric, copper foil and etc.
and the tape slitting process is like this:
A roll of fabric, film or paper is loaded onto the axis, the machine will roll cut or slit this fabric roll ( film roll or paper roll ) into a small tape roll in designate width.
for packaging food:
large rolls of plastic film such as biaxially orientated polypropylene (BOPP), paper or adhsive tape is produced in large diameter roll for maxium efficiency.
the roll are then slit by a tape slitting machine into small rolls of the size to used on the packaging machine.
for Apparel and home use products:
large rolls of fabric or cloth can be slit into various width tape to used as the piping or decoration on the apparel.
and the slitted tape can also be used as the raw material for tape edging the mattress, or for mattress border decoration.
1. Using ultrasonic cutting and edge treatment for melting, so smooth, no rough edges.
2. PLC touch-screen, automatic feed, the computer count, high precision, speed and adjust the length of simple and quick, efficient.
3. Widely been used in gifts belt, nylon belt strip, strip Ribbon, ribbon bar, such as chemical fiber cut straight knife, knife ramps, such as shape Dovetail
4. This machine can cut different shapes of the products, just need to change the cut knife. And also can cut Like:
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc