Polyester Tape Mylar Tape Cutting Machine

Polyester Tape Mylar Tape Cutting Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Polyester Tape Mylar Tape Cutting Machine

China factory bopp adhesive tape rewinding/slitting/cutting machine:

Product Application

I.MAIN TECHNICAL PARAMETERS OF bopp tape slitting machine
1.1.Suitable base material: BOPP tape;
1.2.Valid width: 1300--1600 mm;
1.3.Maximum unwinding diameter: 800mm;
1.4.Maximum winding diameter: 150mm, four-position winder; 320mm, two-position winder
1.5.Diameter of paper core: 3”
1.6.Splitting width: 12-1580mm;
1.7.Mechanical speed: 0-180m/min;
1.8.Electricity: 380V, 50HZ;

Polyester Tape Mylar Tape Cutting Machine

Automatic cold knife nylon webbing tape ribbon cutter tape cutting machine:

This machine is suitable for PP belt,zipper,nylon belt braided belt,elastic belt,magic stick,seat belt,shoulder belt,ribbon,tape,wire,casing,etc for Fixed length cutting.Suitable for belt,ready-made clothing,shoe making,leather bag,leather goods.Electronic and other manufacturing processing.

 

Features

1 High speed:                It can cut 100-120mm  pieces per minute (50mm length as an example)
2 High precision :         Cut-length is accurate owing to the control of microcomputer

3 section neat:            hot knife can heat-seal the section of color riband and light textile braid 
4 Knife :                          knife are made of imported high quality rolled steel,with long using life
5 Automatic operation: It works automatically only by setting length and quantity
6 Automatic stopper:    It stops automatically only by setting length and quantity.
7 Memory:                      Set-length,set-q'ty & set-speed are not erased even if power off & on 

8 Save document:         can save 9 documents,reduce setting time,if it's covenivent to take and operate

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com