Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.
Suitable for rewinding various tape such as BOPP tape, PE, PET, masking tape, double-sided tape, foam tape and paper, film etc many other adhesive and non-adhesive materials.
1) MITSUBISHI Servo motor and A.C. motor control
2) Programmable controller system, MITSUBISHI PLC control and LCD touch screen.
3) The tension is controlled by magnetic break.
4) Rewinding air shaft automatic air inflation system.
5) Automatic smoothing device to eliminate the wrinkle and air bubbles.
6) The pneumatic press roller is controlled by the cylinder and the products are properly pressed to ensure smooth during rewinding process.
This unit is suitable for cutting various materials such as PVC,OPP,PE,Masking tape,Double-dide tape,Kraft tape,cloth tape etc.
1:Main driving parts:Ac motor with inverter is employed and the acceleration and deceleration are fast and stable
2:Central control unit:programmable central control is used and various sizes can be set on the same shaft by antomatic transfer and cutting .
3:Operating panel:all functions are operated on the LCD touch panel
4:Auto adjusting the circular blade angle:the serco motor is subject to different materials
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc