Bopp Roll Cutting Machine

Bopp Roll Cutting Machine

Tape Cutting Machine-

Second, preparation before use:
1. Check the external power supply is correct.
2. Check that the workpiece ground wire is clamped on the workpiece.
3. Turn on the air source and drain the water.
4. Check that the power switch is in the off position.
5. Close the main switch of the power supply of the power grid. At this time, the fan starts to work. Pay attention to check the wind direction. The wind should blow inward. Otherwise, the main transformer will not be ventilated and cooled, which will shorten the working time.
6. Turn the power switch on the panel to the “on” position and the power indicator light. Compressed air should flow out of the torch at this point. Pay attention to whether the pressure gauge pressure gauge pointer is 0.2-0.4 megabytes
Pa position, if the pressure does not match, in the case of gas flow, adjust the upper knob of the filter pressure reducing valve pressure gauge, clockwise to increase pressure, and vice versa.
7. Let the gas flow for a few minutes to remove the condensed water vapor from the torch.

Bopp Roll Cutting Machine

GL-706 circular balde tape roll cutting machine / adhesive tape cutting machine

1. Application

suitable for cutting PVC tape,masking paper tape,double sided tape,kraft tape,conductive foam tape,duck tape,protective film, etc.

 

3. Main Features

1). High cutting precision

2). Big cutting roll diameter

3). All electric elements are famous brands

4). Taiwan shagyin Ball screw

5). 10 inch touch screen operation 

6). Different slitting width can be on same roller

7). Main roller, round blade, inlet blade, speed is adjustable

8). Round blade base is high precision

Bopp Roll Cutting Machine

GL- 320 Type High Speed CE Insulation Paper Die Cutter Machine:

一. Application
It is suitable for cutting various materials, double sided adhesive, plastic-sided, self-adhesive labels, foam, film, foil, and so on.
Applicable to the electronics, automotive, medical, and printing products processing.

二.  Functional characteristics:
A. speed: 0-65m/min, max width of original 330 mm.
B. Precision of die cutting: ±0.01mm, the precision of slice: ±0.01mm
C. Max sizes of finished die cutting:300mm*290mm, min width:80 mm
D. Winding/rewinding tension controlled by the computer fully automatically, its max tension: 15N
E. The operating panel adopts 5.7 inch color touching interface
F. It can operate the fully or semi cutting working( when operating, needless to adjust the pressure or others)
G. It can finish the semi cutting. Its min. thickness: 0.025mm
H. It can count meter/amount with the function of meter/ amount full to stop as well as no feeding to stop.

三.  Main devices:
1. 1 sets of die cutting work station .
2. The work station drive by 3 Yaskwa Servo motor .
3. 2 sets of winding/ rewinding systems, ( converter, magnetic powder clutch)
4. Control color touching interface
5. Power of equipment: 8  kw

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com