Tape Cutting Machine- working principle
The tape cutting machine is also called a tape cutter. The tape is cut by the upper and lower blades, and the length is set according to the length of the customer's demand.
The tape cutter has a sensor, and after the tape cutter cuts the tape,The tape will fall over the sensor. If the tape is removed, the sensor will automatically sense that there is
no tape and immediately send a signal, and the tape will automatically perform the next cutting action. This kind of action is repeated continuously, that is, automatic continuous cutting.
Yuanxiao tape cutting machine mainly has automatic tape cutting machine and manual tape cutting machine. Now it has a wide range of automatic application. Manual cutter is mainly used for tape sealing.
Automatic tape cutters are used in the electronics industry, wire harness industry.
Semi-automatic cutting machine technical operation rules
7. Regular inspection of accuracy and variability
7.1 Detect the positive and negative turbulence of the main motion clutch after it is closed. The value is less than 2.0mm.
7.2 Detecting the running speed adjustment range of the host: the minimum speed is not more than 50mm/min, and the maximum speed is not less than 120mm/min.
7.3 Detecting the gas path part includes the connection of the connecting hose: air tightness: oxygen closed circuit 1.2Mpa, mixed gas path: 0.6 Mpa voltage regulation for 20 seconds shall not leak.
7.4 Detecting the thickness range of the cut steel plate: 10-100mm is acceptable.
7.5 Flame burning test of the torch (visible cutting oxygen flow length): 1#≥70mm; 2#≥90mm;3#≥100mm.
8. Daily maintenance regulations
8.1 After cutting the mouth, pay attention to the protective cover of the fashion, and do not bump.
8.2 Pay special attention to moisture when using and storing.
8.3 The lubricant in the gearbox should be replaced in time.
Tape cutting machine --- function
According to the application range of the tape cutter, the general tape cutter has the following functions: it can cut different materials such as tape, adhesive tape and protective film. You can simultaneously clamp two rolls of tape while cutting. Memory function, turn it off and then turn it on, and still save the original data. Cyclic cutting function, free to set different lengths of cyclic cutting, can cut different thickness of adhesive tape. The safety performance is high. The safety baffle is designed at the cutter. When the machine is blocked, the alarm device works automatically. Even if the blockage is cleared, the machine will not work immediately. You must press the start button again to continue working. Tape cutters are usually designed with no rollers.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc