Automatic Opp Tape Machine

Automatic Opp Tape Machine

Tape Cutting Machine- working principle
The tape cutting machine is also called a tape cutter. The tape is cut by the upper and lower blades, and the length is set according to the length of the customer's demand. 
The tape cutter has a sensor, and after the tape cutter cuts the tape,The tape will fall over the sensor. If the tape is removed, the sensor will automatically sense that there is 
no tape and immediately send a signal, and the tape will automatically perform the next cutting action. This kind of action is repeated continuously, that is, automatic continuous cutting.
Yuanxiao tape cutting machine mainly has automatic tape cutting machine and manual tape cutting machine. Now it has a wide range of automatic application. Manual cutter is mainly used for tape sealing. 
Automatic tape cutters are used in the electronics industry, wire harness industry.

Automatic Opp Tape Machine

Guolian Machinery -- GL-5000 Tape Cutting Machine

The tape cutting machine has a counting and cutting length setting function. When using it, the tape should be placed in the tape cutting machine. The tape head should be pulled, then the power is turned on, the switch is turned on, and the setting is set according to the requirements. After that, press the yellow button on the right (start button), and the tape cutter starts to run and cut.

The tape cutter cuts only a piece of tape at a time, and the cut tape is spit out at the gate. The sensor is installed at the gate. If the tape is not removed, the tape cutter will always be in a stagnant state. When we remove the tape, the tape The cutter will start automatically and cut the next tape. Cycle back and forth.

Product parameters:

Cutting length: 5 ~ 999 mm

Tape width: 6 ~ 50 mm

Maximum outer diameter: 300 mm

Speed: 200 mm/min

Weight: 2.8 kg

Size: 115mm X 140mm X 215mm

Automatic Opp Tape Machine

Automatic tape cutting machine --- Working principle

The automatic tape cutting machine is a small-scale automation device that is used on the assembly line to greatly improve production efficiency. There are basically two types: mechanical and electronic.
The mechanical type is disc type, and the common models are ZCUT-2 and upgraded zcut-8. The zcut-8 is favored by users because of its smaller size and more precise cutting.
The commonly used electronic models are M-1000 and ZCUT-9. Among them, ZCUT-9 tape cutting machine is more and more accepted by customers because of its precise cutting and easy maintenance.

About

Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc

Got any Questions?
CALL US NOW

+86-17744612788

gl006@guolianjixie.com