Tape Cutting Machine- working principle
The tape cutting machine is also called a tape cutter. The tape is cut by the upper and lower blades, and the length is set according to the length of the customer's demand.
The tape cutter has a sensor, and after the tape cutter cuts the tape,The tape will fall over the sensor. If the tape is removed, the sensor will automatically sense that there is
no tape and immediately send a signal, and the tape will automatically perform the next cutting action. This kind of action is repeated continuously, that is, automatic continuous cutting.
Yuanxiao tape cutting machine mainly has automatic tape cutting machine and manual tape cutting machine. Now it has a wide range of automatic application. Manual cutter is mainly used for tape sealing.
Automatic tape cutters are used in the electronics industry, wire harness industry.
PVC electrical tape cutting machine for cutting BOPP, OPP, Cellophane tape, 3M, Mylar, Kapton, EVA,PE, PVC, Masking tape, Double-side adhesive tape, Kraft tape , Protective film, Duct tape , film roll etc. Auto Jumbo Roll Cutting Machine including the Semi-automatic roll cutting machine , single shaft roll cutting machine , double shaft roll cutting machine, YL-708 Fully Automatic 4 Shaft Tape Roll Cutting Machine.
For fully automatic roll cutting machine :
1. Machine with PLC control and color touch screen, easy and convenient to operate to worker,also improves the quality of the finished cut roll;
2. Can accoring to customer's requirments to set 10 differents cutting width and the angle of cutting.( if cutsomer needed maximum can reach 20 types);
3. with automatic spary silicone oil cooling system, thus the finished products with smooth and beautiful cutting surface;
4. Cutter with servo-motor control, apply for different material roll, also machine cutter move forward stablly and smoothly.
5. Cutter and the main shaft adpots AC motor. The high precision ball screw work with servo motor and he straight liner slide rail, machine running smoothly and cutting the material with high precision.
Automatic double sided adhesive tape cutting machine:
This machine is suitable for kinds of adhesive tapes or kinds non-viscous material high precision cutting.
Such as the protective film, high tempreture tape, 3M tape, optical film, foam tape, goldfinger tape, green tape and other electronic material.
You can cut different sizes according to different material.
4. Motor control system: The PLC programmable controller.You can set up various cutting size in the same log roll.Can be adjusted cutting size according to the set up cutting width and cutting roll quantity.
5. Cutting size positioning system: The Mitsubishi servo motor control.Make sure the high accuracy of the ball screw and the linear slide rail positioning in the cutting.
6. Feed positioning system: The Hydraulic motor / Mitsubishi servo motor to control the knife feeding.It can be anthropomorphized as a three-step feeding speed of the cutter.
Improve efficiency and get the best quality.
Zhengzhou EAST IMPORT AND EXPORT co., ltd . ( a goulian group of company) a manufacturer and exporter for all kind of packaging machinery , like bopp tape coating machines, bopp tape slitting machines. Bopp tape core cutter, bopp tape core loader etc